Janome Memory Craft 100E handleiding

112 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 112
15
1. 2.
Winding the bobbin
1.
Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the bobbin winding tension disk.
Draw the thread to the left and forward around the
thread guide.
Firmly pull the thread to the right while holding it with
both hands.
(1) Bobbin winding tension disk
(2) Disk
Bobbin winding when the extra spool pin is
attached
If you want to wind the bobbin with the extra spool
pin while sewing, draw the thread around the bobbin
winding tension disk as shown.
(1) Bobbin winding tension disk
(3)
(6)
(5)
(4)
3. 4.
(8)
(7)
(1)
(2)
5.
6.
7.
2.
Put the bobbin on the bobbin winder spindle.
Be sure that the bobbin snaps into the place.
(3) Bobbin
(4) Slit
(5) Bobbin winder spindle
(6) Spring (Projection)
3.
Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
4.
Insert the thread into one of the slits of the ange
plate and pull the thread to cut.
(7) Flange plate
(8) Slit
5.
Push the bobbin to the right. The visual touch screen
will show the bobbin winding sign.
If you wish to wind the bobbin thread more quickly or
slowly, you can adjust the maximum bobbin winding
speed by pressing the “+” key or “–” key.
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
6.
Press the start/stop button.
Stop the machine when the bobbin is fully wound and
stops spinning.
Return the bobbin winder spindle to its original
position.
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
7.
Remove the bobbin. Cut the thread with one of the
slits of the ange plate.

Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkJanome
ModelMemory Craft 100E
CategorieNaaimachine
TaalNederlands
Grootte24843 MB