Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 60 van 212
58
2.
Lower the foot onto the topside at the end of the
zipper opening so that the needle pierces the fabric
next to the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along
the bottom edge of the foot.
To sew:
1.
Attach zipper foot E.
Fold back the left seam allowance. Turn the
right seam allowance under to form a 0.2 cm to
0.3 cm (1/8˝) fold.
Place the zipper teeth next to the fold and pin in
place.
Set the stitch length and thread tension back to the
original setting.
(1)
0
.2 cm to 0.3 cm (1/8˝)
(2)
Z
ipper teeth
(3)
Fo
ld
(4)
E
nd of the zipper opening
(5)
O
pening size
3.
S
ew through all layers next to the fold.
Stop the machine 5
cm (2˝) before the foot reaches
the slider on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper to clear the slider.
Lower the foot and stitch the remainder of the seam.
(6)
Sl
ider
(7)
5
cm (2˝)
(1)
(2)
(3)
(5)
(4)
1.
2.
3.
(6)
(7)
CAUTION:
Be sure that the needle does not strike the presser
foot or zipper teeth when sewing.
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
