Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 61 van 212
59
4.
Close the zipper and spread the fabric open at
with the right side of the fabric facing up. Attach the
Zigzag foot A.
Adjust the stitch length to 5.0, stitch width to 3.5
(default value) and the thread tension dial at “1”.
Baste the opened fabric and zipper tape together.
(8) Basting
(9) Zipper tape
5.
Attach the zipper foot E with the left pin.
Adjust the stitch length and the stitch width to default
value, and thread tension dial at “4”.
Backstitch across the end of the opening 0.7 cm -
1 cm (3/8˝) and turn the fabric 90 degrees.
(10) 0.7 cm - 1 cm (3/8˝)
6.
Stitch through the garment and zipper tape, guiding
the zipper teeth along the side edge of the foot.
Stop the machine 5 cm (2˝) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Remove the basting
stitches.
(11) 5 cm (2˝)
(12) Basting stitches
7.
Open the zipper, then lower the foot and stitch the
remainder of the seam.
After sewing is nished, remove the basting stitches
on the upper fabric.
(8) Basting
(8)
(9)
(10)
(11)
(12)
4.
5.
6.
7.
CAUTION:
Be sure that the needle does not strike the presser
foot or zipper teeth when sewing.
(8)
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
