Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 25 van 212
23
Replacing the Presser Foot
3.
Press the black lever on the back of the foot holder.
The presser foot will drop off.
(4) Foot holder
(5) Lever
(6) Presser foot
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder.
Lower the presser foot lifter to lock the foot in place.
(7) Pin
(8) Groove
Press the lockout key to lockout the machine.
Removing the presser foot
1.
Raise the needle by pressing the needle up/down
button.
Press the lockout key to lockout the machine.
(1) Needle up/down button
(2) Lockout key
2.
Raise the presser foot lifter.
(3) Presser foot lifter
1.
3.
2.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
CAUTION:
• Always make sure to press the lockout key to lockout
the machine or turn the power switch OFF before
replacing the presser foot.
• Use the proper foot for the selected pattern. The
wrong foot can cause the needle to break.
CAUTION:
To avoid damaging the lever, do not push it down.
NOTE:
Each foot is marked with an identication letter.
(9) Identication letter
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
