Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 26 van 212
24
Removing and Attaching the Foot Holder
Remove the foot holder before using embroidery foot P.
3.
Loosen the setscrew and remove the foot holder.
(4) Setscrew
(5) Foot holder
Removing the foot holder
1.
Raise the needle by pressing the needle up/down
button.
Press the lockout key to lockout the machine.
(1) Needle up/down button
(2) Lockout key
2.
Raise the presser foot lifter.
(3) Presser foot lifter
3.
1.
(3)
2.
Attaching the foot holder
1.
Attach the foot holder to the presser bar from behind.
Tighten the setscrew partially with the screwdriver.
(1) Foot holder
(2) Presser bar
(3) Setscrew
2.
Lower the presser foot lifter.
(4) Presser foot lifter
3.
Tighten the setscrew securely with the screwdriver.
Press the lockout key to unlock the machine.
(3) Setscrew
1. 3.
2.
(1)
(2)
(3)
(5)
(4)
(1)
(2)
(4)
CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch OFF before
replacing the foot holder.
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
