Janitza 800-CT24 handleiding
Handleiding
Je bekijkt pagina 18 van 60
800-CT24 module www.janitza.com
18
4. Mounting
CAUTION
Disregard of the installation instructions may
cause property damage or personal injury!
Disregard of the installation instructions may cause
damage to your basic device with module or destroy it
and/or may also result in personal injury.
· In addition to the installation instructions for your
module, also observe the installation instructions
for your basic device, in particular the safety and
warning information.
· Before installing modules
- Disconnect the supply of power to the system!
- Secure it against being switched on!
- Check to be sure it is de-energized!
- Ground and short circuit!
- Cover or block off adjacent live parts!
· Operate the basic device that belongs to the
800-CT24 module only with a supply voltage of
24V! Observe the technical specifications in the
usage information for the basic device.
· Provide adequate air circulation in your installa-
tion environment and cooling, as needed, when
the ambient temperatures are high.
· Return defective modules to Janitza electronics
GmbH in accordance with the shipping instruc-
tions for air or road freight (complete with acces-
sories).
· All usage information is available for download at
www.janitza.com.
Observe the mounting instructions for your basic de-
vice and 800-CONRJ45 transfer module (e.g. check
bus connector installation!) and mount the 800-CT24
module in the de-energized system as follows:
1. Press your 800-CT24 module onto the DIN rail
until the bottom bolts engage.
2. Connect the 800-CONRJ45 module to the input
side of the 800-CT24 module. Use a commer-
cially available Ethernet cable (RJ45 cable for
JanBus communication!) for this purpose.
3. Connect the output side of the 800-CT24 module
to
- the input side of the next 800-CT24 module.
- an additional 800-CON-RJ45 transfer module
to expand the JanBus topology (see Sect. “4.2
The 800-CT24 module in JanBus module topol-
ogies” on p. 20)
The basic device automatically recognizes the mod-
ule during the power-up procedure! The number of
800-CT24 modules permitted on a basic device can
be found in “Tab. Suitable basic devices” on p. 2.
4.1 Mounting the 800-CT24 module with
800-CONRJ45 transfer module
Bekijk gratis de handleiding van Janitza 800-CT24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CT24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9037 MB |
