Janitza 800-CON-RJ45 handleiding
Handleiding
Je bekijkt pagina 17 van 36
www.janitza.com
17
Module800-CON-RJ45
Figures:
Module rear views
1. Press in the bottom bolts on the rear of the mod-
ule.
2. If this has not yet been done, press the bus con-
nector (JanBus interface) included in the respec-
tive scope of delivery into the sockets on the rear
of your module.
Output bus connector
Output bus connector,
rotated
Bottom bolt, open
Bottom bolt, pressed in
press
3. Press the transfer module with output bus
connector onto the DIN rail until the bottom
bolts audibly engage.
4. Push the contacts of the transfer module with
output bus connector into the sockets of the
basic device bus connector or into the sock-
ets of the connected module so that the devic-
es are coupled.
Basic device
Bottom
bolts
DIN rail
Transfer module 800-CON-RJ45
with output bus connector
click!
Contacts of
the output bus
connector
Basic device bus connec-
tor (internal)
Basic device
Contacts of
the output bus
connector
Basic device bus connec-
tor (internal)
Transfer module 800-CON-RJ45
with output bus connector
Transfer module output bus
connector (internal)
ATTENTION
Material damage due to voltage applied to the
basic device during installation!
Coupling while energized can destroy your basic
device or the module!
· Observe the warnings and safety information
at the beginning of this chapter and check to
be certain your basic device is de-energized
before connecting modules!
Bekijk gratis de handleiding van Janitza 800-CON-RJ45, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CON-RJ45 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5042 MB |
