JANDY CD100 handleiding
Handleiding
Je bekijkt pagina 19 van 24
Page 19
Jandy
®
Pro Series Ozone Generator
4.3 System Startup and Operation
To start the ozone generator:
1. Turn on the pool circulation system.
2. The generator will power up and the green indicator lights on the
ozone cells will illuminate.
3. Open the enclosure door by removing two (2) screws on the front
panel.
4. Verify that indicator lights for each ozone module are green.
5. Close the door and reinstall two (2) screws on the front panel.
4.4 System Shut-Down and Winterizing
When shutting down for service or winter storage:
1. Disconnect the power to the ozone generator.
2. After the generator has been shut down, the pool water
circulation pump may be turned off.
3. (Winterizing) If the system will be shut down for an extended
period, disconnect the ozone tubing and tube adapter from the
unit and store indoors. Install the 3/4” pipe cap provided on to the
injector to seal the system.
Bekijk gratis de handleiding van JANDY CD100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JANDY |
| Model | CD100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2422 MB |
