Jackson FlightStar handleiding
Handleiding
Je bekijkt pagina 27 van 90
07610-004-81-74-A
19
Drain and clean the dishmachine per the instructions in this manual. During cleaning,
any items that appear to be broken or failed should be reported to authorized service
personnel.
1. Delime the machine. The deliming agent that you use might require more or
less frequency in application. Because water conditions vary from installation
to installation, it might be necessary to delime the machine more or less often.
Follow the chemical supplier's instructions regarding frequency of application and
adjust the maintenance schedule as required.
2. Verify there are no leaks. This includes inspecting the integrity of all gaskets,
including the ones inside the machine, as well as ensuring that none of the
silicone used between the individual sections has frayed or been removed. Any
torn gaskets should be immediately replaced. Re-apply silicone as required. The
machine should be completely turned o and drained for this procedure so that
gaskets in the lower parts of the tanks can be examined.
3. Verify the operation of the emergency stop switches. Start the machine with all
personnel standing clear and push an emergency stop switch to verify that it
stops the machine. Do this for each switch. The emergency stop switch stops the
conveyor belt and the pumps, but the heaters remain on. If the emergency stop
switch fails to stop the machine, then the wiring to the switch should be veried.
If, according to the schematic, the switch is wired correctly, then it is most likely
faulty and should be replaced. Immediately inform operating personnel of the
defect and instruct them as to where other emergency stop switches are as well
as the main stop switch on the front control panel.
4. Verify the operation of the door switches. Start the machine with all personnel
standing clear and open each door one at a time to verify that the unit shuts o.
Do this for all pre-wash, wash, and power rinse doors. The door switches stop the
conveyor belt and the pumps, but the heaters remain on.
DAILY
MAINTENANCE
WEEKLY
MAINTENANCE
3. Missing strainers. It is easy to forget to put the strainers back after removing
them, so it is important to train operating personnel on the importance of putting
everything back when they are nished. If the strainer was not important, it would
never have been incorporated into the machine design. Strainers are implemented
to prevent failure of the more expensive components of the dishmachine (e.g.
pumps) and should always be replaced before operating the machine. The
manufacturer strongly recommends that you do not operate the machine without
the strainers as doing so not only allows damage to occur to the machine, but
could also void the warranty. Train personnel to report whenever a strainer is
missing or damaged so that replacements can be ordered immediately.
STRAINERS
PREVENTATIVE MAINTENANCE
MAINTENANCE
!
WARNING
WARNING! Hot water can
drip as doors are opened.
Bekijk gratis de handleiding van Jackson FlightStar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | FlightStar |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12592 MB |
