Jackson FlightStar handleiding
Handleiding
Je bekijkt pagina 26 van 90
07610-004-81-74-A
18
PREVENTATIVE MAINTENANCE
The concept of preventative maintenance is to perform small checks and procedures
that will limit the catastrophic failures your machine could experience. A catastrophic
failure is anything that will keep the machine from operating for an extended period of
time. Dishmachines, regardless of size, are very simple machines and do not require
very much in the way of preventative maintenance. Listed here are some maintenance
items that will prolong the life of the machine.
It cannot be stressed enough that in order for the machine to work at peak eciency,
the introduction of food and soil must be limited. Though the FlightStar is a large
machine, it is not a garbage disposal, and it contains several parts that have very small
openings. These openings can become clogged very quickly if large food particles are
introduced to the machine. Train operating personnel in proper scrapping techniques.
This includes scraping excess food from plates and bowls and removing straws from
glasses.
Some ware might require soaking before being placed in the machine, especially
silverware and casserole dishes. Soaking helps loosen stuck-on food particles and
aids the machine in removing such soil. Sink soak options are available and can be
discussed with your authorized dealer.
Machines should be cleaned at least daily and one of the most important aspects of
this task is the removal, cleaning, and proper replacement of the various strainers
located throughout the machine. Strainers are added to try and prevent any debris
from getting inside the pumps or in the arms of the machine. Both the pumps and the
arms have very close tolerances manufactured into their design in order to deliver
optimum performance.
There are generally three problems associated with strainers:
1. Not removed for cleaning. Many operators are simply unaware that the strainers
can and should be removed for cleaning. How often this should be done is based
on usage and is generally something that can be determined with experience. It
is important, however, to not only tell operators about the strainers, but to show
them where they are at and remind them that they should be cleaned regularly.
2. Damaged strainers. Many times the rst impulse for cleaning strainers is to take
them and beat them on the side of a garbage can. The strainers are made from
stainless steel and delivering such blows to them will eventually warp them. A
warped strainer does not sit ush and creates gaps that debris and soil can get
through. The proper method of cleaning a strainer is to wipe it out and then rinse it
with water to get any debris out. Remember that it is much easier and inexpensive
to clean out a strainer than it is to replace a pump!
MAINTENANCE
OVERVIEW
PRE-SCRAPPING
STRAINERS
MAINTENANCE
CAUTION! Do NOT beat
strainers to remove
soil and debris!
!
CAUTION
Bekijk gratis de handleiding van Jackson FlightStar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jackson |
| Model | FlightStar |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12592 MB |
