Ixxat CAN@net II/VCI handleiding
Handleiding
Je bekijkt pagina 14 van 22
CAN@net II - Manual, V2.0
Configuration
14
3.3 CAN Bus Termination
There is no bus termination resistor for the CAN bus assembled on the
CAN@net II.
As an accessory a bus termination resistor is available as a feed through
connector at HMS (ordering number 1.04.0075.03000).
4 Configuration
4.1 Configuration Tool
4.1.1 Overview
The configuration tool, which is installed automatically with the VCI, is used to
set the network parameters of the CAN@net II.
The tool scans the network for CAN@net II devices. The detected devices are
shown in the “Device List” and can be configured separately.
Picture 4-1: Configuration tool
Bekijk gratis de handleiding van Ixxat CAN@net II/VCI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ixxat |
| Model | CAN@net II/VCI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4008 MB |
