Ixxat CAN@net II/VCI handleiding
Handleiding
Je bekijkt pagina 13 van 22
CAN@net II - Manual, V2.0
Connections and Indicators
13
3.2.5 Link/Data Activity LED (ACT)
The green LED shows the connection status of the Ethernet interface.
Flashing mode
Description
Causes/Hints
Off
No Link detected.
• No connection to an Ethernet
network
• Network cable damaged
Green
Ethernet Link detected,
but no communication
• Network connection ok, but no
network traffic at the moment
Green/Green
blinking
Ethernet
communication
• Network traffic detected
Table 3-8: States of the Link/Data Activity LED
3.2.6 CAN LED (CAN)
The two-color (green and red) LED for CAN flashes on each CAN message
(transmitted or received) green, if there was no error detected.
If the CAN controller is in the “Error warning” or “Error passive” state, the LED
flashes red on each message. In the “Bus off” state the LED is continuously red.
Flashing mode
Description
Causes/Hints
Off
No CAN
communication
• No CAN communication
• Device not connected to CAN
Green/Green
blinking
CAN communication
• With each CAN message the LED
is triggered
Red blinking
CAN communication,
CAN controller in
error state
• CAN controller is in the “Error
Warning” or “Error passive” state,
the reception/transmission of CAN
messages is still possible
Red
Bus Off
• CAN controller is in “Bus Off”
state, no CAN communication
possible
Table 3-9: States of the CAN LED
Bekijk gratis de handleiding van Ixxat CAN@net II/VCI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ixxat |
| Model | CAN@net II/VCI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4008 MB |
