IOGEAR GW4K60KIT handleiding
Handleiding
Je bekijkt pagina 7 van 17
12 13
SSID Pairing Mode:
Note: Follow all previous setup steps prior to starting SSID
Pairing
1. With both the transmitter and receiver connected and
powered on, for 5 seconds press and hold the channel
button on the front of the transmitter. The WIFI indicator on
the transmitter will begin to ash rapidly.
2. For 5 seconds, press and hold the channel button on the
front of the receiver. The WIFI indicator on the receiver
will begin to ash rapidly and the Display connected to the
receiver will show “Pairing”
3. Wait approximately 10 seconds and the received display will
stop showing “Pairing” and change back to “ipcolor channel
X”. At this point press the channel button on the transmitter 1
time to exit SSID pairing mode.
4. After a few seconds, the Local Display and the Remote
display will both show the source video.
In the case that multiple sets of being used at the same time in
close proximity, press the channel button to cycle through the 4
channels to prevent interference.
Channel # Frequency
Channel 1 5.180GHz
Channel 2 5.200GHz
Channel 3 5.220GHz
Channel 4 5.240GHz
Operation Trouble Shooting
Q: The transmitter and receiver cannot connect to each
other.
1. Move the transmitter and receiver closer to each other.
2. Turn the transmitter and receiver o and on again.
3. Re-pair the transmitter and receiver.
Q: Why does the wi indicator show that the connection
is steady, but the screen shows “Please check the TX
input signal”
Make sure the transmitter has HDMI input, and the resolution
is within the specied range.
Q: Why is the display stuttering or unstable?
1. Place the transmitter or receiver withing the signal
coverage and minimize obstructions between the
transmitter and receiver.
2. Switch to a dierent channel to avoid interference from
other wireless signals.
3. Turn the transmitter and receiver o and on.
Bekijk gratis de handleiding van IOGEAR GW4K60KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GW4K60KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1248 MB |
