IOGEAR GW4K60KIT handleiding
Handleiding
Je bekijkt pagina 8 van 17
14 15
Compliance InformationSpecication
Power Supply Voltage/Current DC 5V/2A
Power Consumptions TX ≤ 7W, RX ≤ 4W
HDMI Performance
and Interferance
HDMI Version HDMI 2.0
HDCP Version HDCP 1.4/HDCP 2.2
Maximum transfer rate 18Gbps
Resolution supported 4096x2160@30Hz,
3840x2160@24/30/
50/60Hz,
1080P@50/60Hz,
720P@50/60Hz,
1920x1200, 2560x1440,
2560x1600
Input and output TMDS signal 0.7~1.2Vp-p (TMDS)
Input and output DDC signal 5Vp-p (TTL)
Transmission Wi-Fi Frequency bands 5.18~5.24 GHz
Transmission Distance ≤ 50m
Latency 80~140ms
Connection types One-to-one
SSID pairing Supported
Protection Level ESD Protection 1a Contact discharge
level 3
1b Air discharge level 3
Standard: IEC61000-4-2
IR Perfomance Infrared frequency 20~60kHz
Receiving range ≤ 5m
Operating Environ-
ment
Working termperature -20~60 celsius
Storage temperature -30~70 celsius
Humidity (no condensation) 0~90% RH
Physical Properties Dimension TX: 115(W) x 125(L) x
20.6(H) mm
RX: 115(W) x 125(L) x
20.6(H) mm
Color Black
Material Iron
Net Weight TX: 346g; RX: 338g
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital service, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. Any changes or modications
made to this equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Statement:
This device has been tested and found to comply with the following
European Union directives: Electromagnetic Capability (2004/108/EC),
Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).
Bekijk gratis de handleiding van IOGEAR GW4K60KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GW4K60KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1248 MB |
