IOGEAR GW4K60KIT handleiding
Handleiding
Je bekijkt pagina 6 van 17
10 11
Transmitter:
1. Connect the HDMI source device via an HDMI cable to
the HDMI “In” Port on the rear of the transmitter.
2. Connect an HDMI cable from the HDMI “Out” on the
rear of the transmitter to a local HDMI display. (Optional)
3. Connect the Included antennas to the two antenna
connectors on the rear of transmitter
4. If using the keyboard and mouse control, connect the
included USB cable to the USB port on the front of the
transmitter to the supported source device.
5. Connect the included power adapter from the
transmitter to a 120v source
Receiver:
6. Connect an HDMI cable from the HDMI “Out” on the
rear of the receiver to an HDMI display.
7. Connect the Included antennas to the two antenna
connectors on the rear of receiver
8. If using the keyboard and mouse control, connect a
standard USB keyboard and USB mouse to the USB
ports on the front of the receiver.
9. Connect the included power adapter from the
transmitter to a 120v source
OPTIONAL: If using the IR Receiver and Blaster
10. Connect the included IR blaster extension cable to the
“IR Out” on the back of the transmitter.
11. Connect the included IR receiver extension cable to the
“IR in” on the back of the receiver
Hardware Installation
6
1
2
3
3
7
7
5
4
8 8
9
Transmitter Back
Transmitter Front
Receiver Front
Receiver Back
Transmitter
Receiver
Bekijk gratis de handleiding van IOGEAR GW4K60KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IOGEAR |
| Model | GW4K60KIT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1248 MB |
