Intermatic PE953 handleiding
Handleiding
Je bekijkt pagina 31 van 51
Four: Programming for Use with Z-Wave Devices 31
Providing a brighter solution.™
Including Z-Wave Devices into the Network
This procedure includes Z-Wave devices into a network controlled by the
PE953Hand-HeldController.ThePE953ispre-conguredtooperatewith
the PE653 Receiving Device. The PE953 can also operate as a stand alone
Z-Wave remote controller. Z-Wave devices from other manufacturers may
be part of the same network as the PE953 and PE653, and depending on
supported features, can act as repeaters.
1. Ifnecessary,pressandreleaseanybuttononthe
Hand-Held Controller to wake it from sleep. If the
screen is not displaying LEARN MODE, press and
hold the <P/S> and <ENTER> buttons at the same
time to put the device into programming mode. You
are in programming mode when the LEARN MODE
screen is displayed, as shown at the right.
2. Press and release the <3> function button to select
INCLUDE DEVICE. The screen refreshes with
instructionstoPRESSBUTTONONDEVICETO
INCLUDE,asshown.
3. Press the button on the Z-Wave device for including
thedeviceinanetwork(refertothemanufacturer’s
instructions).
Iftheactionissuccessful,thescreendisplaysthe
word SUCCESSFUL, as shown, then returns to the
programming screen.
NOTE: If the two devices are not successfully linked and you are seeing
the word FAILURE at the bottom of the screen, carefully repeat the
procedure. If the problem persists, contact Intermatic Customer Service.
4. Repeat this procedure for all other Z-Wave home control devices that are to be
part of the network.
5. Press the <ENTER> button if you wish to return to the Main screen.
Including the PE653 Receiver onto a non-Multi-Wave remote
controller
The PE653 is a Z-Wave compliant device that may be included into networks
createdbyothermanufacturer’sZ-Wavecompliantcontrollers.
ToincludethePE653intoanothermanufacturer’scontroller:
1. 1.Activatethecontroller’sINCLUDEfunctionaccordingtothat
manufacturer’sinstructions.
2. 2.PressandreleasetheINCLUDEbuttononthePE653.
Iftheincludewassuccessful,theredashingLEDonthePE653willchange
tosteadyON.(ThesteadyONLEDwillashrapidlywheneveranother
device is communicating with it.)
ToexcludethePE653fromanothermanufacturer’scontroller:
1. Activatethecontroller’sEXCLUDEfunctionaccordingtothat
manufacturer’sinstructions.
2. PressandreleasetheINCLUDEbuttononthePE653.
Iftheexcludewassuccessful,theredashingLEDonthePE653willchange
fromsteadyONtoslowlyashingONandOFF.
Bekijk gratis de handleiding van Intermatic PE953, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PE953 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8177 MB |
