Intermatic PE953 handleiding
Handleiding
Je bekijkt pagina 32 van 51
32 Multi-Wave PE953 Installation Guide
Copyright © 2011 Intermatic, Inc.
Adding Z-Wave Devices to Scenes for Everyday Control
Z-Wave devices must be added to Scenes for the Hand-Held Controller
to be able to control them. Scenes are groups of Z-Wave devices that
all act together. For example, you may group all outdoor lighting or all
upstairs lighting into a single scene, so that the push of one button will turn
everythingonoroff.TheHand-HeldControllercancontroluptovescenes.
NOTE: If a Z-Wave controlled light is on a dimmer switch, you can preset
the dimmer level when adding the light to a scene.
Beforeyoucanaddadevicetoascene,itmustrstbeincludedinthe
network.
1. Ifnecessary,pressandreleaseanybuttononthe
Hand-Held Controller to wake it from sleep. If the
screen is not displaying LEARN MODE, press and
hold the <P/S> and <ENTER> buttons at the same
time to put the device into programming mode. You
are in programming mode when the LEARN MODE
screen is displayed, as shown at the right.
2. Press the <4> button to add a device (already
included as part of the network) to the scene. The
screen displays PRESS 1-5 TO CHOOSE A SCENE
TOADDTHEDEVICETO,asshown:
3. Press one of the buttons (<1> through <5>) for
the scene you want the device added to. The
screendisplaysPRESSBUTTONONDEVICE
TOINCLUDE,asshown(Scene4isusedasan
example).
4. Press the button on the Z-Wave device for including
thedeviceinascene(refertothemanufacturer’s
instructions). The screen displays instructions: SET
DEVICELEVELTHENPRESSXX(thescenenumber
youhaveselected)TOSAVEDEVICETOSCENE.
5. Set the device level for the item being controlled.
There are circumstances where you may want to
turn some lights off and others ON when the scene is activated, so set
accordingly.
NOTE: If the device you want to control is a dimmer switch, preset the
dimmer level to the desired brightness at this time.
6. Press the scene control button (button <4>, for scene 4, in this example) as
instructed. The screen displays SUCCESSFUL. The device is now included
in the scene, as you have set it.
7. Repeat Steps 4 through 6 for other devices you want to add to the scene, or
Steps 2 through 6 to create other scenes as necessary.
8. Press the <ENTER> button if you wish to return to the Main screen.
Renaming a Scene
Assupplied,thePE953screendisplaysthenamesofthevescenesas
SCENE1,SCENE2,etc.Youcanrenamethescenessotheybetterdescribe
their actual function, making the system easier to use.
• BeginwiththeSCENEACTIVATIONscreen
1. Ifnecessary,pressandreleaseanybuttononthe
Hand-Held Controller to wake it from sleep. If the
screen is not displaying LEARN MODE, press and
hold the <P/S> and <ENTER> buttons at the same
time to put the device into programming mode. You
are in programming mode when the LEARN MODE
screen is displayed, as shown at the right.
2. Press the <ENTER> button as necessary to display
the Z-Wave user screen, as shown at the right.
3. Press the DOWN button as necessary to reach the
Z-Wave Options screen, as shown:
4. Press the number button for the scene you want to rename. The screen
shiftstoshowjustthatscenename,andhighlightstherstletterofthe
name.
5. Use the UP or DOWN arrow buttons to scroll through the list of available
characters to use in the Scene name. The valid character set for names is:
A-Z, 1-9, and SPACE.
6. When you have selected the right letter or number, press the <P/S>
button to move right to the next character.
7. Repeat Steps 6 and 7 until you have completed the renaming.
8. Press the <ENTER> button to save the name and return to the Z-Wave
OPTIONSscreenasshownabove.Pressthe<ENTER> button as
necessary to return to the Main screen.
Bekijk gratis de handleiding van Intermatic PE953, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intermatic |
| Model | PE953 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8177 MB |
