Intergas Xtend Split handleiding
Handleiding
Je bekijkt pagina 70 van 88
70
Parameter Category Setting
Default
value Description/Setting range
P182P182
CH comfort
Setting the maximum that the average
room temperature and the set room
temperature can be exceeded by.
2 1 ºC to 5 ºC.
P183P183
CH comfort
Setting the pump flow rate if the
heating pump is activated
l/min).
15.0 3 to 25 l/min.
P184P184
CH comfort
Setting the pump flow rate if the
heating pump is NOT activated
l/min).
6.5 3 to 25 l/min.
P186P186
CH comfort
Setting the threshold value for
immediate involvement of the boiler at
a timed program setpoint (from 2.2 ºC)
2.2 0.0 to 5.0 ºC
P187P187
CH comfort
Setting ON/OFF thermostat switches
per hour
0
0 = o (no pulsing)
1 to 12 = (number of switches per hour)
P188P188
CH comfort
Setting a base point for a timed
program ‘ON period‘ (if there is no
setpoint) (see §11.5).
20 ºC 15 ºC to 30 ºC.
P189P189
CH comfort
Setting a base point for a timed
program ‘OFF period‘ (if there is no
setpoint) (see §11.5).
20 ºC 15 ºC to 30 ºC.
P190P190
CH comfort
Setting a pump flow rate if only the
boiler is active (l/min).
15.0 3.0 to 25.0 l/min.
P191P191
CH comfort
Activating/deactivating CH clock
program.
0
0 = o
1 = on
P192P192
CH comfort Setting heating curve slope 1.10 0.00 to 2.50 (increments of 0.01)
P194P194
CH comfort Setting maximum supply temperature. 70 20 ºC to 85 ºC.
P195P195
CH comfort Setting proportional constant. 160 0 to 255
P196P196
CH comfort
Setting integrating factor
(a lower value yields a quicker
response).
1 0 to 255
P197P197
CH comfort
Setting a dierentiating constant (a
higher value yields a quicker response
in alternating circumstances).
0 0 to 255
P198P198
CH comfort
Setting maximum positive
displacement of the heating curve as a
result of room heating compensation.
10 ºC 0 ºC to 50 ºC.
P199P199
CH comfort
Setting maximum negative
displacement of the heating curve as a
result of room heating compensation.
10 ºC 0 ºC to 50 ºC.
P200P200
CH comfort Setting heating system 0
0 = underfloor heating
1 = radiators
2 = convectors
Bekijk gratis de handleiding van Intergas Xtend Split, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Xtend Split |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11570 MB |
