Intergas Xtend Split handleiding
Handleiding
Je bekijkt pagina 69 van 88
69
Parameter Category Setting
Default
value Description/Setting range
P128P128
Bivalent
Activation/deactivation of the heat
pump blockage program; see §11.1.1
0
0 = no, heat pump not blocked
1 = yes, heat pump can be blocked
P129P129
Bivalent
Minimum control percentage of the
boiler during on/o operation.
(relates to P127)
10 5% to 100%
P130P130
Defrosting Activating the boiler during defrosting. 1
0 = always activate the boiler when
defrosting.
1 = only activate the boiler below a certain
minimum temperature (P131).
2 = never activate the boiler.
P131P131
Defrosting
Setting minimum supply temperature
when defrosting (see P130=1).
15 ºC 5 ºC to 30 ºC.
P140P140
Bivalent
Setting electricity rate per kWh (high
rate).
0 0 to 9999 £/KWh.
P142P142
Bivalent
Setting electricity rate per kWh (low or
o-peak rate).
0 0 to 9999 £/KWh.
P144P144
Bivalent Setting rate per m gas 0 0 to 9999 £/m
P146P146
Bivalent
Setting CO emissions in grams per
KWh.
0 0 to 9999 g/KWh.
P165P165
Heat pump
Setting degree minutes for heating.
This aects when the heat pump starts
and stops (a higher value means fewer
activation changes).
0
0 = adaptive mode (adjusts itself)
1 to 42 degree minutes
(increments of 10 degree min.)
P167P167
Heat pump
Setting compressor reduction
percentage during Silent mode
(if P172=2)
50 20 to 100%
P171P171
Heat pump
Setting the external temperature value
(Silent mode deactivated below this
external temperature).
-20 ºC -20 ºC to 20 ºC.
P172P172
Heat pump
Activation/deactivation of Silent
mode.
0
0 = o
1 = on (fixed, non-adjustable reduction of
5 dB)
2 = a maximum percentage set by
the user (adjustable using P167)
P175P175
Heat pump
Setting whether the crankcase heater
remains hot.
1
0 = never (only when compressor starts)
1 = maximum of 24 hours
2 = always
P176P176
Heat pump
This setting determines if or when the
boiler will become involved in heating
for the crankcase heater.
1
0 = never
1 = automatic (delay time determined
based on P113, P114, P115 and P116)
2 = always
P180P180
CH comfort Setting the CH timed program. 0
0 = Comfort mode
1 = Eco mode
P181P181
CH comfort
Setting the dierence in room
temperature and heating threshold.
3 0 ºC to 15 ºC.
Bekijk gratis de handleiding van Intergas Xtend Split, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Intergas |
| Model | Xtend Split |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11570 MB |
