InfiRay Rico Hybrid HYH75W handleiding
Handleiding
Je bekijkt pagina 23 van 31
42 43
3 Freeze Icon: Appears when the image is frozen.
4 Reticle: Shows the new reticle position.
3. Center the reticle on the aiming point and long press the
Brightness
and Photo Buttons at the same time to freeze
the image. The image freeze
icon will appear below the
X/Ycoordinates.
4. Rotate the Rotary Encoder to move between X and Y. Blue text
indicates the cursor location.
5. Short press the Rotary Encoder to select the axis (X or Y) along
which to move the reticle. A blue arrow appears to the left of the
selected axis.
6. Adjust the X/Y position of the reticle until the reticle matches the
point of impact.
a. X (horizontal) is the windage and Y (vertical) is the elevation.
b. Upon moving the reticle, a white dot appears on the screen,
representing the original reticle position for the selected
axis.
c. Rotate the Rotary Encoder clockwise to move in the positive
direction: X=Right and Y=Up.
d. Rotate the Rotary Encoder counterclockwise to move in the
negative direction: X=Left and Y=Down.
e. Rotate one click to move the reticle in the corresponding
direction by 1 pixel. One full rotation (20 clicks) is equivalent
to 20 pixels.
f. When adjusting your zero at a distance of 50 yards, one
click will change the impact point by 0.14” and one full
rotation moves 2.9”, as shown in the X and Y coordinate
displays. At 100 yards that same click moves 0.29”. At 200
yards one click moves 0.58”.
g. Changing your zero distance will change the distance
of your X/Y adjustments automatically. If your selected
zero distance has a correction of 2.87” at 100 yards, it
will automatically change to 5.76” if you change the zero
distance to 200 yards.
7. Save OR clear the reticle position along the selected axis.
a. Short press the Power Button to clear the reticle position
for the selected axis, returning the reticle to the original
position for that axis; OR
b. Short press the Rotary Encoder to save the position for the
selected axis and deselect it. The blue arrow will disappear.
8. Repeat steps 4–7 to move the reticle to the desired location.
9. Long press the Rotary Encoder to save and return to the home
screen.
10. Take a confirmation shot—the point of impact should now match
the point of aim. If not, adjust the X/Y position of the reticle again.
ZEROING MENU > ZERO DISTANCE SUBMENU >
CUSTOMIZE ZERO DISTANCE
Customize a preset
zero distance
The RICOHYBRID
supports custom zero
distances of 1 to 999
yards or 1to 999 meters.
1. In the submenu for
the selected zero
distance, rotate the
Rotary Encoder to
move to the preset
zero distance.
2. Short press the Rotary Encoder to begin customizing the zero
distance. A blue arrow icon will appear above the selected
digit to mark the cursor location. The far-left digit is selected by
default.
3. Rotate the Rotary Encoder to increase or decrease the value of
the selected digit, from 0–9.
4. Short press the Rotary Encoder to switch between the three
digits. The blue arrow icon will move to indicate the selected
digit.
5. Long press the Rotary Encoder to save the custom zero distance
and return to the zero distance submenu.
6. The new zeroing distance appears in the lower-left corner of the
screen.
File Management
Manage photo and
video files
NOTE: The file
management menu
item is disabled when
Wi-Fi or recoil activated
video is turned on
in the menu, when a
video is recording, and
when the rifle scope
is connected to a
computer via the data
cable.
1. Long press the Rotary Encoder to enter the main menu.
2. Rotate the Rotary Encoder to select the file management
menu item.
Bekijk gratis de handleiding van InfiRay Rico Hybrid HYH75W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | Rico Hybrid HYH75W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8175 MB |
