InfiRay Rico Hybrid HYH75W handleiding
Handleiding
Je bekijkt pagina 20 van 31
36 37
Standby
Set standby time
To conserve battery,
the RICOHYBRID may
be set to automatically
enter standby mode after
a specified length of
inactivity.
1. Long press the
Rotary Encoder to
enter the main menu.
2. Rotate the Rotary Encoder to select the standby menu item.
3. Short press the Rotary Encoder to enter the submenu.
4. Rotate the Rotary Encoder to move through the standby
submenu options, 5min, 10min, 20min, 30min, 60min, or o. The
standby status changes in real-time, and the standby icon and
status (5min, 10min, 20min, 30min, or 60min, or o) appear in the
lower-right corner of the screen.
5. Long press the Rotary Encoder to confirm the selection and
return to the home screen.
6. When standby is turned on, the RICOHYBRID will automatically
enter standby mode after the set number of minutes of inactivity.
7. When in automatic standby mode, short press the Power
Button to exit standby and return to the home screen.
STANDBY NOTES:
• When 5min, 10min, 20min, 30min, or 60min is selected:
• The RICOHYBRID will enter standby mode automatically
when it is tilted up or down at an angle of more than 70° or
left or right at an angle of more than 30°.
• The RICOHYBRID will not enter standby mode while it is in a
level firing position.
• When o is selected, standby mode is turned o and the rifle
scope will operate until the battery runs out.
• Standby mode may be manually activated from the home screen
at any time.
Photo Settings
Set the photo settings
The RICOHYBRID has
three photo settings,
single-shot, burst, and
self-timer. Self-timer mode
will automatically take a
photo after a 5-second
delay. Burst mode will
take a photo every
second for 6seconds.
1. Long press the Rotary Encoder to enter the main menu.
2. Rotate the Rotary Encoder to select the photo settings menu
item.
3. Short press the Rotary Encoder to enter the submenu.
4. Rotate the Rotary Encoder to move through the submenu
options, single-shot
, burst , and self-timer modes.
Single shot mode is selected by default.
5. Long press the Rotary Encoder to confirm the selection and
return to the home screen.
Recoil Activated Video
Turn the recoil
activated video on / o
1. Long press the
Rotary Encoder to
enter the main menu.
2. Rotate the Rotary
Encoder to select the
recoil activated video
menu item.
3. Short press the
Rotary Encoder to
enter the submenu.
4. Rotate the Rotary Encoder to toggle recoil activated video
on / o. The recoil activated video icon
appears on the left
side of the screen when turned on and a 30-second timer starts.
When turned on, the rifle scope will record 30 seconds of video
before a shot is taken and 30 seconds after.
5. Long press the Rotary Encoder to confirm the selection and
return to the home screen.
Bekijk gratis de handleiding van InfiRay Rico Hybrid HYH75W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | Rico Hybrid HYH75W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8175 MB |
