InfiRay Rico Hybrid HYH75W handleiding
Handleiding
Je bekijkt pagina 18 van 31
32 33
7. Select shooting
table
to enter the
submenu.
8. Select one of the
three shooting table
options, 500yd,
1000yd, or 2000yd to
edit it.
9. Use the Rotary
Encoder to customize
the shooting table.
Rotate to move
through the range inputs in the table, short press to add data to
a table cell, and long press to save the data point and exit the
cell.
NOTE: It is not necessary to input data for each distance point, but
more information will result in greater accuracy.
10. Long press the Rotary Encoder to save the changes made to
your selected shooting table and exit the submenu.
To activate the BDC reticle:
1. In the zeroing profile menu, select BDC reticle to enter the
submenu.
2. Rotate the Rotary Encoder to turn on the toggle. When turned on,
a BDC-style reticle based on your customized shooting table is
active and overrides the reticle set in the quick menu.
a. If you have already zeroed at the selected distance, the BDC
reticle will reference that location as its zero position.
b. If a yardage stadia is missing from this reticle, it is too close
to the others and will only be visible when you zoom in by
rotating the Rotary Encoder.
To enable the ballistic solver function:
1. In the zeroing profile
menu, select
ballistics solver to
enter the submenu.
2. Rotate the Rotary
Encoder to turn on
the toggle. When
the ballistic solver
is on, a secondary
aiming point will be
superimposed on the
BDC reticle based
on your customized shooting table and the target distance. Five
auxiliary points are positioned to the left and the right of the BDC
reticle’s solution result, oering the hunter additional aiming
positions on both sides.
a. The target distance is provided by the optional LRF module
(see the documentation provided with the LRF for more
information on its operation) or manually input in the quick
menu (see Using the Quick Menu on page19).
b. A total of 10 auxiliary points are provided, each with a pair of
points spaced 1 MOA (3.375 MIL) apart, and they are updated
along with the BDC reticle result.
NOTES:
• A zeroing distance of 50yd, 100yd, 200yd, 300yd, etc. must be
selected in the zeroing
menu. See Main Menu > Zeroing on
page40.
• Ballistic data must be entered in the shooting table in MOA or
MIL. See Advanced Menu > Unit for instructions on switching
between units. This data can be obtained from a ballistics solver
or your ammunition maker.
• Ballistics data should be verified on a known range before using
it in the field.
• If the drop in your shooting table does not match the actual drop
of your ammo/firearm, you can adjust, or true, the data in the
table at any time based on your exact ballistics. This is normal
and is not a result of a problem with the optic.
27. BALLISTIC TURRET
The RICOHYBRID
supports a ballistic turret,
enabling you to quickly
fine-tune the position of
the aiming reticle in both
the X and Y directions.
This ensures accurate
shooting when sighting
through the reticle.
1. From the home page,
double-click the
Rotary Encoder to
enter the ballistic turret interface.
2. Short press the Rotary Encoder to move through the interface
options, X, Y, and Zoom. The selected option will turn blue.
3. With X or Y selected, rotate the Rotary Encoder to adjust the
position of the reticle in MOA.
4. With Zoom selected, rotate the Rotary Encoder to move through
the four zoom options, ×4, ×8, ×16, and ×32.
5. Double-click the Rotary Encoder to save and exit the ballistic
turret interface.
Bekijk gratis de handleiding van InfiRay Rico Hybrid HYH75W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | Rico Hybrid HYH75W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8175 MB |
