InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 22 van 26
40 41
3. Rotate the Control Turret to select the correct value for each
digit (hour and minute).
4. Short press the Control Turret to switch between digits. The two
triangle icons move to indicate the selected digit.
5. Long press the Control Turret to save the time.
6. The time appears on the right side of the status bar.
SETTINGS MENU > UNITS OF MEASURE
Set the units of
measurement
1. In the settings submenu,
rotate the Control Turret
to select the units
menu item.
2. Short press the Control
Turret to enter the units
of measure submenu.
3. Rotate the Control Turret
to move through the unit
options, meters and yards. Meters are selected by default.
4. The selected units, m (meters) or y (yards), will display, along with
the selected zero profile and distance, on the left side of the
status bar.
5. Short press the Control Turret to confirm the selection and return
to the Settings menu.
SETTINGS MENU > STATUS AUTO HIDING
Turn status auto hiding
on / o
This function enables all
interface information, aside
from the reticle, to be
automatically hidden for
unobstructed image-view.
When auto-hide is turned
on, after 8seconds of
inactivity the status bar,
digital compass, and all interface icons will be automatically hidden.
Shortcut buttons and the menu are disabled until the entire interface
is again displayed. Press any button to un-hide the user interface.
When o is selected, auto-hiding the status bar is turned o.
NOTE: When the menu is open, the status bar will not auto-hide.
1. In the settings submenu, rotate the Control Turret to select the
status auto hiding
menu item.
Off
2. Short press the Control Turret to enter the submenu.
3. Rotate the Control Turret to move through status auto hiding
options, on and o. O is selected by default.
4. Short press the Control Turret to confirm the selection and return
to the Settings menu.
SETTINGS MENU > FACTORY RESET
Restore factory default
settings
1. In the settings submenu,
rotate the Control Turret
to select the factory reset
menu item.
2. Short press the Control
Turret to enter the factory
reset submenu.
3. Two options, Yes and No,
appear; Yes will restore
factory settings and No will cancel the operation. No is selected
by default.
4. Short press the Control Turret to confirm cancellation of the
factory reset and return to the Settings menu; OR
5. Rotate the Control Turret to select Ye s and short press the
Control Turret to select Ye s to confirm the factory reset.
Factory settings will be restored and the TL35V2 will reboot
automatically.
NOTES:
• There is a pause of about 15 seconds before the factory restart
begins. Do not press any buttons during this time.
• A factory reset cannot be undone.
• The settings listed below will be reset to the factory defaults:
• Color Palette: White hot
• Display Brightness: 3
• Image Sharpness: 3
• Magnification: 3.0×
• Ultra-Clear mode: O
• Wi-Fi: O
• Bluetooth: O
• Calibration: Automatic
• Digital Compass: O
• Motion Sensor: O
• Zeroing Profile: A
• Reticle Type: 1
• Reticle Color: Black
• Standby Settings: O
• Date: 2020:01:01
• Time: 00:00
• Status Auto Hiding: O
• Wi-Fi SSID:
Infiray-TUBE-XXXXXX
• Wi-Fi Password:
12345678
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
