InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 21 van 26
38 39
12. A popup window shows
the message “Do you
want to keep these
settings?” and two
options, Yes and No. Yes
is selected by default.
13. Short press the Control
Turret to select Ye s to
correct the saved list of
defective pixels and exit
to the home screen.
A 5-second countdown appears on the screen, followed by
“Saved Successfully” ; OR
14. Rotate the Control Turret to move to No and short press the
Control Turret to exit to the main menu without correcting any
defective pixels.
NOTES:
• The PIP window and interface controls move to the upper-left
corner when the cursor moves into the lower-left corner of the
screen.
• After 15 seconds of inactivity, the system will automatically exit
the defective pixel interface.
Compass Calibration
Calibrate the digital
compass
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control Turret
to move through the
menu to select the
compass calibration
menu item.
3. Short press the Control
Turret to begin compass
calibration. A triaxial
coordinate prompt will
appear on the screen.
4. Follow the prompt to
rotate the TL35V2
at least 360degrees
along each axis, X, Y,
andZ. Rotations must
be completed within the
45-second calibration time.
5. After 45 seconds, the calibration is finished and the system will
automatically exit to the home screen.
Settings
Adjust the general settings
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control
Turret to move through
the menu to select the
settings
menu item.
3. Short press the Control
Turret to enter the settings submenu.
4. There are seven submenu items: date, time, language, units of
measure, status auto hiding, factory reset, and info.
SETTINGS MENU > DATE
Set the date
1. In the settings submenu,
rotate the Control Turret
to select the date
menu item.
2. Short press the Control
Turret to edit the date.
White triangle icons will
appear above and below
the year value. The date
is displayed in
YYYY.MM.DD format.
3. Rotate the Control Turret to select the correct value for each
digit (year, month, and day).
4. Short press the Control Turret to switch between digits. The two
triangle icons move to indicate the selected digit.
5. Long press the Control Turret to save the date.
SETTINGS MENU > TIME
Set the time
1. In the settings submenu,
rotate the Control Turret
to select the time
menu item.
2. Short press the Control
Turret to edit the time.
White triangle icons will
appear above and below
the hour value. Time is
displayed as HH.MM, in
24-hour format.
2022.01.01
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
