InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 23 van 26
42 43
SETTINGS MENU > INFO
Show device information
1. In the settings submenu,
rotate the Control Turret
to select the info
menu
item.
2. Short press the Control
Turret to enter the info
submenu.
3. The info submenu will
display the following
information: the model
number, GUI version, SYS Info, boot and FGPA version, PN, and
SN numbers, hardware version, and FCC ID.
4. Long press the Control Turret to return to the previous menu.
28. BASIC INSPECTION
It is recommended to carry out a technical inspection before each
use. Please check the following:
• The rifle scope appearance: there should be no cracks in the
body or visible damage.
• The condition of the objective lens and eyepiece: there should be
no cracks, greasy spots, dirt, or other deposits on the lens.
• The internal rechargeable battery pack should be fully charged.
• The control buttons should be in working order.
29. BASIC MAINTENANCE
Always replace the objective lens cap (15) after use to avoid
damaging or scratching the lens. Never touch the lens directly; oil
from your skin can damage the lens coating and surface.
Basic maintenance should be carried out at least twice a year and
includes the following steps:
• Wipe the surface of the external metal and plastic components
with a clean, dry cotton cloth. Do not use chemical, corrosive,
or abrasive cleaners. Canned air may also be used to clean the
external components.
• Clean the electric contacts and battery slots on the rifle scope
using a non-greasy organic solvent.
• Check the lens and eyepiece. If necessary, remove any dirt or
sand from the optics; a non-contact cleaning method is preferred.
• Cleaning the exterior of the lens should only be done with the
included microfiber lens cloth or a similar product. Only clean
the lens when it is visibly soiled. Frequent wiping or cleaning can
degrade the anti-reflective lens coating.
Model: TL35V2
SYS: 20220602114
Boot: 202109262022
FGPA: 0413
GUI: 1.31
PN: 2D1-1002-01-A
SN: LH0008
HW: V60D
FCC:
30. WARRANTY
At iRayUSA we’re first and foremost hunters and users of our products
and we understand that failure isn’t an option. We also understand
that having to wait extended periods for repair isn’t something that
a customer should have to put up with when something does go
wrong. During your published warranty period, iRayUSA will repair
or replace, at its discretion, any optic that becomes defective during
normal use. Additionally, if we cannot fix your optic in less than one
week, we will oer to replace it with a replacement product in like or
better condition.If you would rather wait for your specific optic to be
repaired, we can handle that too.
We know you’ve never seen this from a thermal manufacturer, neither
have we, and that’s why we started iRayUSA.
Our warranty follows the product and is not tied to the original
owner. The warranty period is tied to the date of sale to the dealer.
This warranty only covers normal use and does not cover cosmetic
damage, normal wear, intentional damage, theft, loss, any act of God,
or a condition caused by use other than intended. Any product that is
modified, opened, or tampered with will void any warranty coverage.
Any serial number damage or alteration on the product will be
considered a modification. Be sure to register your BOLT TL35V2 rifle
scope at irayusa.com/register.
To return a product for repair:
1. Go to irayusa.com/warranty and click the Request an RMA button
to request an RMA number. Returns will not be accepted without
an RMA.
2. The customer is responsible for shipping the product to iRayUSA,
per the instructions included with the RMA. iRayUSA will return
the product at no cost.
• The one-week timeline starts from the time of receipt of the
product at iRayUSA.
• iRayUSA is not liable for any damages or loss incurred when
shipping to iRayUSA.
• This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Please give us a call at 800-769-7125, visit irayusa.com/warranty, or
email info@irayusa.com with any questions.
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
