InfiRay BOLT TL35 V2 handleiding
Handleiding
Je bekijkt pagina 17 van 26
30 31
Calibration
Select non‑uniformity
correction mode
The BOLT TL35V2 has three
non-uniformity correction
(NUC) modes: Automatic(A),
Manual(M) and
Background (B).
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control Turret to move through the menu to select
the calibration
menu item.
3. Short press the Control Turret to enter the calibration submenu.
4. Rotate the Control Turret to move through the submenu options,
Automatic(A), Manual (M), and Background (B). Automatic(A) is
selected by default.
5. The selected NUC mode, A, M, or B, appears on the left side of
the status bar.
6. Long press the Control Turret to confirm the selection and return
to the home screen.
Compass
Turn the digital compass
on / o
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control
Turret to move through
the menu to select the
compass
menu item.
3. Short press the Control Turret to turn the digital compass
on / o. The digital compass is o by default.
4. When the compass is on, it appears in the center of the status bar.
5. Long press the Control Turret to return to the home screen.
Motion Sensor
Turn the motion sensor
on / o
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control Turret
to move through the
menu to select the motion
sensor
menu item.
3. Short press the Control Turret to turn the motion sensor on/o.
The motion sensor is o by default.
4. When the motion sensor is on, the pitch angle appears on the
right side of the screen and the tilt angle appears on the left side
of the screen.
5. Long press the Control Turret to return to the home screen.
NOTE: The tilt angle is not shown in the figure above because it is
hidden by the menu.
Rifle Selection
Select the zeroing profile
1. Long press the Control
Turret to enter the main
menu.
2. Rotate the Control Turret
to move through the
menu to select the rifle
selection
menu item.
3. Short press the Control
Turret to enter the
submenu.
4. Rotate the Control Turret
to move through the rife
zeroing profile options, A,
B, and C. The default is A.
5. The selected rifle zeroing
profile, A, B, or C,
appears on the left side
of the status bar.
6. Long press the Control
Turret to confirm the
selection and return to the home screen.
0
20
20
-18°
Rifle Selection
Rifle Selection
Bekijk gratis de handleiding van InfiRay BOLT TL35 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TL35 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6057 MB |
