InfiRay BOLT TH50C V2 handleiding
Handleiding
Je bekijkt pagina 7 van 28
10 11
8. CHARGING THE BUILT-IN
BATTERY PACK
The BOLT TH50CV2 has a dual power supply: a built-in
rechargeable li-ion battery pack and an optional auxiliary battery
(18500 or 18650 with adapter; batteries not included). The dual
battery system supports a run time of 8 hours out of the box and
10+hours when using an auxiliary battery.
The built-in battery pack is not removable or replaceable. Please
ensure the battery pack is fully charged before the first use.
To charge the battery pack:
1. Remove the USB-C port cover (8) by turning it counterclockwise.
2. Connect the smaller USB-C end of the data cable (16) to the
USB-C port (9).
3. Connect the standard USB end of the data cable to:
a. Any standard USB 3.0 port on a laptop/computer; OR
b. A 5V–2A USB power adapter and plug the power adapter
into an electrical outlet.
4. While charging, the LED status indicator (10) above the USB-C
port will turn red. When the indicator LED turns green, the
battery is fully charged.
Data Cable (16)
USB-C
Connector
USB Connector
USB-C Port
Cover (8)
USB-C Port (9)
LED Status
Indicator (10)
5. When fully charged, disconnect the data cable from the USB-C
port and replace the USB-C port cover.
a. It takes about 3–5 hours to charge the battery. Do not
overcharge.
b. See Battery Status Indicators on page12 for additional
battery information.
WARNING: Never charge the battery pack with a USB adapter
that is greater than 5V–2A.
NOTES:
• You may charge and operate the TH50CV2 at the same time.
• When the battery status icon turns red and only one bar remains,
charge the battery right away to avoid over-discharge and a
reduction in battery capacity or servicelife.
• When the built-in battery pack is charging, a charging
icon
appears above the battery status indicator in the bottom-right
corner of the screen.
• Only the built-in battery pack will be charged while connected
via the USB-C port.
9. INSTALLING AN AUXILIARY
BATTERY
The optional auxiliary battery compartment allows the run-time of
the TH50CV2 to be expanded to 10+ hours. 18500, or 18650 with
adapter, rechargeable li-ion batteries (optional/not included) are
compatible with the TH50CV2.
Ensure the 18500/18650 auxiliary battery is fully charged before
using with the TH50CV2 for the first time.
To install an auxiliary battery:
1. Remove the auxiliary battery cover (11) by turning it
counterclockwise.
2. Insert a 18500 battery (or 18650 plus adapter) (12) into the
auxiliary battery compartment(13) following the polarity markings
inside the compartment. The positive [+] battery terminal faces in
and the negative [-] terminal faces out.
3. Replace the battery cover.
Auxiliary Battery
Cover (11)
18500/18650 Auxiliary
Battery (12)
Auxiliary Battery Compartment (13)
NOTE: If using a 18650 battery, replace the standard auxiliary
battery cover (11) with the IRAY-AC37 18650 Battery Extender
(optional/not included).
Bekijk gratis de handleiding van InfiRay BOLT TH50C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TH50C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7222 MB |
