InfiRay BOLT TH50C V2 handleiding

Handleiding

12345678910111213141516171819202122232425262728/ 28

Afdrukken

Je bekijkt pagina 6 van 28

8 9

7. QUICK START GUIDE

Step 1: Preparing to Use the BOLT TH50CV2

1. Compare the box contents to the accessories list and examine

each for any shipping damage. See Accessories on page4.

2. Check the lens to ensure there are no smudges or dirt present.

Clean with the included lens cloth, as needed.

3. Charge the built-in battery pack before using the TH50CV2

for the first time. See Charging the Built-in Battery Pack on

page10.

4. Install the eyeguard(1).

5. Mount the TH50CV2 to the weapon using the included 30 mm

rings. See Mounting the BOLT TH50CV2 on page15.

Step 2: Turn On and Adjust the Focus

1. Open the objective lens cap (15).

2. Long press the Power

Button for 2 seconds to power on the

TH50CV2. The InfiRay logo will appear.

3. Rotate the diopter adjustment ring (2) of the eyepiece until the

interface icons are clearly visible.

4. Rotate the objective lens focus ring (14) to focus on the object

being observed.

WARNING: Do not point the objective lens toward intense

energy sources, such as the sun. This may render the electronic

components inoperative. The warranty does not cover damage

caused by improper operation.

Step 3: Activate and Customize the Reticle

The reticle may be inactive when the TH50CV2 is powered on for

the first time. To activate the reticle, press and hold the Photo

and Brightness

Buttons at the same time for at least 15seconds.

1. From the home screen, short press the Control Turret to enter

the quick menu (see Using the Quick Menu on page20):

a. Select the reticle type, from 1–6.

b. Select the reticle color, white, black, red, or green.

Step 4: Adjust the Image Settings

From the home screen:

1. Short press the Palette

Button to set the color palette to

white hot, black hot, red hot, highlight, or color.

2. Short press the Brightness

Button to adjust the screen

brightness, from 1–5. The screen brightness

icon and the

selected brightness level appear at the bottom of the screen.

3. Short press the Control Turret to enter the quick menu to adjust

the image sharpness, from 1–5. See Using the Quick Menu on

page20.

4. Short press the Power

Button to perform a non-uniformity

correction, as needed. See Non-Uniformity Correction (NUC) on

page23.

5. Rotate the Control Turret to zoom in and out on the observed

object. See Digital Zoom on page28.

6. Long press the Palette

Button to turn on the PIP window. See

Picture in Picture (PIP) on page28.

7. Long press the Control Turret to enter the main menu to:

a. Turn on Ultra-clear mode to enhance the image contrast

in inclement weather. See Main Menu > Ultra-clear on

page31.

b. Set the image temperature to warm or cold. See Settings

Menu > Image Hue on page44.

Step 5: Adjust Rifle Scope Settings

1. From the home screen, long press the Control Turret to enter

the main menu to:

a. Turn on the digital compass. See Main Menu > Compass on

page32.

b. Turn on the gravity sensor. See Main Menu > Gravity Sensor

on page32.

c. Change the non-uniformity correction (NUC) mode to

automatic, manual, or background. See Main Menu >

Calibration on page37.

d. Calibrate the digital compass. See Main Menu > Compass

Calibration on page41.

e. Set the date and time. See Settings Menu > Date and

Settings Menu > Time on page42.

f. Set the units of measurement to meters or yards. See

Settings Menu > Units of Measure on page43.

Step 6: Zero the TH50CV2

1. Zero the rifle scope following the instructions in Zeroing the

BOLT TH50CV2 on page22.

a. Select the zeroing profile, A, B, or C. See Main Menu >

Zeroing Profile on page33.

b. Select, or customize, a preset zero distance that matches

the target distance. See Reset Zeroing Distance Menu >

Zero Distance on page34.

c. Zero the reticle. See Reset Zeroing Distance Menu > Reticle

Zeroing on page34.

12345678910111213141516171819202122232425262728/ 28

Bekijk gratis de handleiding van InfiRay BOLT TH50C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van InfiRay (Niet gecategoriseerd)

Handleiding bekijken

InfiRay Rico Hybrid HYH75W

Niet gecategoriseerd - handleiding

Handleiding bekijken

InfiRay Mini MH25 V2

Niet gecategoriseerd - handleiding

Handleiding bekijken

InfiRay Bolt TL25 SE

Niet gecategoriseerd - handleiding

Handleiding bekijken

InfiRay BOLT TL35 V2

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd