InfiRay BOLT TH50C V2 handleiding
Handleiding
Je bekijkt pagina 25 van 28
46 47
SETTINGS MENU > INFO
Show device information
1. In the settings submenu,
rotate the Control Turret
to move through the
submenu and select the
info
menu item.
2. Short press the Control
Turret to enter the info
submenu which displays
the following information
about the TH50CV2: GUI
version, SYS Info, boot
version, FPGA, PN and
SN number, and hardware version.
3. Long press the Control Turret to return to the settings submenu.
27. BASIC INSPECTION
It is recommended to carry out a technical inspection before each
use. Please check the following:
• The rifle scope appearance: there should be no cracks in the
body or visible damage.
• The condition of the objective lens and eyepiece: there should
be no cracks, greasy spots, dirt, or other deposits on the lens.
• The internal rechargeable battery pack should be fully charged.
• The control buttons and turret should be in working order.
• The mount should be tight and correctly installed on the rail.
28.BASIC MAINTENANCE
Always replace the objective lens cap (15) after use to avoid
damaging or scratching the lens. Never touch the lens directly; oil
from your skin can damage the lens coating and surface.
Basic maintenance should be carried out at least twice a year and
includes the following steps:
• Wipe the surface of the external metal and plastic components
with a clean, dry cotton cloth. Do not use chemical, corrosive,
or abrasive cleaners. Canned air may also be used to clean the
external components.
• Clean the electric contacts and battery slots on the rifle scope
using a non-greasy organic solvent.
• Check the lens and eyepiece. If necessary, remove any dirt
or sand from the optics; a non-contact cleaning method is
preferred.
Info
A
GUI : 182
MODEL: TH50C V2
SYS : 20220528103
Boot : V1.0
FPGA : 0811
PN : 2D4-7002-01-A
SN : WW1001
HW : V7.0
• Cleaning the exterior of the lens should only be done with the
included microfiber lens cloth or a similar product. Only clean
the lens when it is visibly soiled. Frequent wiping or cleaning can
degrade the anti-reflective lens coating.
29. WARRANTY
At iRayUSA we’re first and foremost hunters and users of our
products and we understand that failure isn’t an option. We also
understand that having to wait extended periods for repair isn’t
something that a customer should have to put up with when
something does go wrong. During your published warranty period,
iRayUSA will repair or replace, at its discretion, any optic that
becomes defective during normal use. Additionally, if we cannot fix
your optic in less than one week, we will oer to replace it with a
replacement product in like or better condition.If you would rather
wait for your specific optic to be repaired, we can handle that too.
We know you’ve never seen this from a thermal manufacturer, neither
have we, and that’s why we started iRayUSA.
Our warranty follows the product and is not tied to the original
owner. The warranty period is tied to the date of sale to the dealer.
This warranty only covers normal use and does not cover cosmetic
damage, normal wear, intentional damage, theft, loss, any act of God,
or a condition caused by use other than intended. Any product that is
modified, opened, or tampered with will void any warranty coverage.
Any serial number damage or alteration on the product will be
considered a modification. Be sure to register your BOLT TH50CV2
rifle scope at irayusa.com/register.
To return a product for repair:
1. Go to irayusa.com/warranty and click the Request an RMA
button to request an RMA number. Returns will not be accepted
without an RMA.
2. The customer is responsible for shipping the product to
iRayUSA, per the instructions included with the RMA. iRayUSA
will return the product at no cost.
• The one-week timeline starts from the time of receipt of the
product at iRayUSA.
• iRayUSA is not liable for any damages or loss incurred when
shipping to iRayUSA.
• This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Please give us a call at 800-769-7125, visit irayusa.com/warranty, or
email info@irayusa.com with any questions.
Bekijk gratis de handleiding van InfiRay BOLT TH50C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InfiRay |
| Model | BOLT TH50C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7222 MB |
