Indesit Push&Go IN2FE13DT9WUK handleiding

50 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 38 van 50
EN / 38
Depending on the step of the pro-
gramme you cancelled, detergent
or rinse aid may remain in the ma-
chine and/or on the washed items.
When the Program Selection Knob
is turned to the "Off" position, the
washing program ends and the ma-
chine becomes ready for program
selection again. If the washing is
ended in this way, water and deter-
gent may remain in the machine.
7.6 Salt Deficiency Warning Indic-
ator
To understand whether the amount of
softening salt in your machine is sufficient,
check the salt deficiency warning indicator
on your machine's screen. When the salt
deficiency warning indicator on your ma-
chine's screen starts to light up, you need
to refill the salt compartment with salt.
Adjusting the water hardness level is ex-
plained in the Water Softening System sec-
tion.
7.7 Rinse Aid Deficiency Warning
Indicator
To understand whether the amount of
rinse aid in your machine is sufficient,
check the rinse aid shortage warning in-
dicator. When the rinse aid shortage
warning indicator starts to light up, you
need to fill the rinse aid compartment
with rinse aid.
7.8 Adjusting the Amount of Rinse
Aid
1. While the Program Selection Knob is in
the “Off” position, turn the Program Selec-
tion Knob one step clockwise while holding
down the Half Load/Tablet function button
and continue to hold the function button for
3 seconds. At the end of this period, the
machine will enter the rinse aid adjustment
mode.
2.When you enter the rinse aid setting
mode, the rinse aid level in the memory is
shown on the program follow-up LEDs for 5
seconds.
3.For new Rinse Aid setting; turn the Pro-
gram Selection Knob to the appropriate po-
sition.
4. Press the Start / Pause / Cancel button
once to store the selected setting.
5. When you turn the Program Selection
Knob back to the “Off” position, the ma-
chine will return to normal mode.
Rinse Aid Amount Program Selection Button Level Rinse Aid Adjustment Indicator
1 dose of rinse aid is added. 1
The Wash indicator on the panel
lights up
2 doses of rinse aid are added. 2
The Drying indicator on the panel
lights up.

Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9WUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkIndesit
ModelPush&Go IN2FE13DT9WUK
CategorieVaatwasser
TaalNederlands
Grootte6024 MB