Handleiding
Je bekijkt pagina 9 van 40
09
Fitting the Adjustable Feet
• Carefully remove all parts that are not permanently
fixed, including the accessories stored within the
oven cavity.
• In a team of at least two people, gently tilt the
appliance by raising on side slightly from the floor.
• With the plates in position, screw the adjustable
feet into the mounting holes found underneath the
appliance. Repeat this process on each side.
• You can make the final adjustments to the feet
in order to level the appliance once the gas and
electricity supply have been connected.
• If it is necessary to pull the appliance, the feet must
be screwed in fully beforehand. Make your final
adjustments only when the remaining steps have
been completed.
Fitting the Splash Back
• Remove the packaging and protective film from the
splash back, taking care to dispose of the material
safely and responsibly,
• Screw the splash back onto the rear of the appliance
using the two supplies bolts, each with a washer, a
retaining washer and a nut.
Fitting the Decoration Plate
• Tilt the appliance by raising one side slightly from
the floor
• Screw the adjustable foot into the mounting hole at
the bottom of the appliance
You can make the final adjustments to the feet in order
to level the appliance once the gas and electricity
supply have been connected. If it is necessary to pull the
appliance, screw the adjustable feet in fully. Make the
final settings only when the other installation tasks have
been completed
Installation Instructions (Continued)
X4
Bekijk gratis de handleiding van InAlto IU9EIB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IU9EIB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4419 MB |
