Handleiding
Je bekijkt pagina 8 van 40
08
Prior to Beginning Installation
• Make sure to check the condition of the appliance
after unpacking it. Do not continue with installation
if it has been damaged during transport
• Safe operation of this appliance can only guaranteed
if it has been professionally assembled and installed
in accordance with these instructions by a qualified
technician. The individual who assembled and
installed the appliance is liable for damages or faults
resulting from an incorrect assembly or installation
• Installation and maintenance must be carried
out by an authorised service agent or similarly
qualified technician
• Ensure power to the appliance has been shut o
before carrying out any installation or maintenance
• It is vital that the appliance is properly earthed before
completing the installation process
• If a rangehood is to be fitted, follow the installation
guidelines supplied with the rangehood
• The safe operation of this appliance can only be
guaranteed if it has been installed to a professional
standard by these installation instructions.
The installer shall be liable for any damage resulting
from incorrect installation
• The entire installation process requires two
professional installers. Wear dry protective
gloves during installation to avoid scratches or
electric shock
• Fitted units must be heat-resistant up to 90°C,
and adjacent unit fronts up to 70°C
• Do not install the appliance behind a decorative door
or the door of a kitchen unit, as this may cause the
appliance to overheat
• Check the appliance for damage after unpacking it.
Do not connect the appliance if it has been damaged
in transit
• Do not block the vent of the appliance and the gap
between the cupboard and the appliance
• Use extreme caution when moving or installing the
appliance. It is very heavy, do not lift the appliance by
the door handle
• If the power cord or power plug is damaged, stop
using the appliance immediately, to avoid fire,
electric shock or other injuries
• Be very careful when moving or installing the
appliance to avoid damage to the appliance or
damage to the cupboards
• Before starting up the appliance, remove all
packaging materials and accessories from the cavity
• The power socket shall be accessible to users (such as
next to the cupboard) for easy power-o
• After installation is complete, make sure that the
power plug is firmly inserted into the socket
• The use of the gas ranges produce heat and humidity
where are installed
• Be sure that there is a good air flow, keeping
natural air ventilation through a window or door
or by installing a range hood to extracet the air.
If ventilation is not good, this might cause lack of
oxygen, what is dangerous for your health and the
gas performance
• If the gas range will be working for a long period
of time, an extra ventilation will be necessary to
increase the air flow
• Air draft should not decrease the good performance
of the gas range or cut the gas flame
• To install your gas range to a LPG (Liquefied
Petroleum Gas) pie, check if your house has a gas tap
exclusive for the gas range and it this is in
good condition
• Be sure that your house has an exclusive plug for your
gas range and this is in good conditions
• Do not install the range on top of carpets
• Do not install the range near the refrigerator, as the
excessive heat hinders its yield
Installation Instructions
Bekijk gratis de handleiding van InAlto IU9EIB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IU9EIB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4419 MB |
