Handleiding
Je bekijkt pagina 20 van 30
20
Prior to Cleaning Your Oven
• Before any maintenance and cleaning, turn o the
appliance and disconnect the power.
• Set all controls in their o positions.
• Wait until the inside of the unit is not hot but only slightly
warm—cleaning is easier than when warm.
• Clean the surface of the unit with a damp cloth, soft
brush or fine sponge and then wipe dry.
• In case of heavy soiling, use hot water with non-abrasive
cleaning product.
• For cleaning the oven door glass, do not use abrasive
cleaners or sharp metal scrapers, as these can scratch the
surface or lead to the glass being damaged.
• Never leave acidic substances (lemon juice, vinegar)
on stainless steel parts.
• Do not use a high pressure cleaner for cleaning the unit.
• The baking tray and wire shelving may be washed in
mild detergent. Alternatively, you can place them in a
dishwasher and run a program that does not exceed 30°C
• You can wash the baking tray and wire shelving with
mild detergent. Alternatively, you can place them in a
dishwasher and run a program that that does not
exceed 30°C.
NOTE: If cleaning in a dishwasher, it is not advisable to
use rinse aids.
To extend the life of your oven, it must be cleaned frequently,
keeping in mind that:
• The enamelled, steel or aluminium parts should be washed
with lukewarm water without using any abrasive powders
or corrosive substances which could ruin them; stainless
steel could get stained. If these stains are dicult to
remove, use special products available on the market.
After cleaning, it is advisable to rinse thoroughly and dry.
• The inside of the oven should preferably be cleaned
immediately after use, when it is still warm, with hot
water and soap; The soap should be rinsed away and the
interior dried thoroughly. Avoid using abrasive detergents
(for example cleaning powders, etc.) and abrasive
sponges for dishes or acids (such as lime scale remover)
as these could damage the enamel. If the grease spots
and dirt are particularly tough to remove, use a special
product for oven cleaning, following the instructions
provided on the packet.
• Never use a steam cleaner for cleaning inside of oven.
• If you use your oven for an extended period of time,
condensation may form. Dry it using a soft cloth.
• There is a rubber seal surrounding the oven opening which
guarantees its perfect functioning. Check the condition
of this seal on a regular basis. If necessary, clean it and
avoid using abrasive products or objects to do so. Should
it become damaged, please contacts you’re nearest After-
sales Service Center. We recommend you avoid using the
oven until it has been repaired.
• Never line the oven bottom with aluminium foil, as the
consequent accumulation of heat could compromise the
cooking and even damage the enamel.
• Clean the glass door using non-abrasive products
or sponges and dry it with a soft cloth.
Bulb Replacement
To replace your oven cavity’s lamp bulb, follow this guide:
• Disconnect power from the mains outlet or switch o the
circuit breaker of the unit’s mains outlet.
• Unscrew the glass lamp cover by turning it counter-
clockwise (note, it may be sti) and replace the bulb
with a new one of the same type.
• Remove the lamp and replace with a lamp resistant
to high temperatures (300°C) with the following
characteristics:
– Voltage: 220-240V
– Wattage: 25W
– Type: G9
• Replace the glass cover and reconnect the oven to the
mains power supply.
Cleaning & Maintenance
Bekijk gratis de handleiding van InAlto IO9060XL10T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IO9060XL10T |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3185 MB |
