IKEA ÖSTVEDA 105.681.48 handleiding
Handleiding
Je bekijkt pagina 21 van 44
ENGLISH 21
FLOOR LIGHT
While the washing program is running, a floor
light is projected onto the floor under the
dishwasher door. When the wash cycles are
started, the light stays on until the end of the
wash cycle. To indicate the end of the wash
cycle, the floor light is activated intermittently
for 10 sec.
The light is not active when the machine is in
the delayed start or pause condition.
The indication will not be visible if the plinth
panel is positioned forward or if something is
placed in front of the information projector.
AUTO DOOR OPEN button
This option activates a special device that
opens the door a few centimeters during or at
the end of the drying cycle (depending on the
programmes), favouring a more natural and
efficient drying of the dishes. The duration of
the selected cycle will be automatically modified,
to allow the rinsing temperatures to be
optimised, providing a significant reduction in
energy consumption. Opening the door in the
last stage of drying enables air to be recirculated,
eliminating the risk of unpleasant odours.
This option will automatically be active in the
"ECO" programme.
There is however the option to deactivate it.
WARNING: With this option selected,
you must not in any way prevent the
door from opening or force it to close,
so as not to damage the mechanism.
Leave the space in front of the door
free and before clos
ing it, wait for the
opening device to reactivate.
"NO SALT" warning light
When the "SALT" message appears on the
display or, where present, the relative light
comes on fill the tank (see chapter on
"ADDING THE SALT").
If the setting level of the softener is set to 0,
this will never happen (see chapter on setting
the softener).
"NO RINSE AID" warning light
When the "RINSE AID" message appears on
the display or, where present, the relative light
comes on, fill the tank (see chapter "LOADING
RINSE AID").
If the RINSE AID level is set to 0, this will never
happen.
DELAY START button
Delay start selection:
This button allows you to programme the start
of the wash cycle, with a delay between 0:30
and 24 hours. To set the delayed start proceed
as follows:
- Switch on the dishwasher by pressing
and holding the "ON/OFF" button for
about 3 seconds.
- Select the washing programme.
- Press the "DELAY START" button ("0:30"
will appear on the display).
- Press the button again to increase the
delay by 30 minutes, after each time
the button is pressed it will increase by
1 hour up to a maximum of 24:00.
Pressing the button again after a delay
of 24:00 will return to 0:00 (delayed start
disabled).
- The delayed start settings will remain
visible on the display for 5 seconds, or
until the ON/OFF - PROGRAM
SELECTION - START/OK buttons are
pressed.
Bekijk gratis de handleiding van IKEA ÖSTVEDA 105.681.48, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | ÖSTVEDA 105.681.48 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4787 MB |
