IFM VMB301 handleiding
Handleiding
Je bekijkt pagina 10 van 48
VMB301 Condition monitoring sensor with CANopen interface
10
u Apply the adhesive layer as thinly as possible.
In general, methyl-cyanoacrylate adhesives (e.g. Loctite 454) or epoxy adhesives (e.g. Loctite
EA 3450) are used.
When choosing a suitable adhesive always take the materials and the environmental conditions
(e.g. temperature range) into account.
Environmental conditions (e.g. temperature or weather) can have an influence on the adhesive
bond.
u Take the environmental conditions into account during installation.
6.4 Magnet
Using magnets is only recommended for temporary measurements and is only suitable for magnetic
surfaces.
u Fix the sensor to the magnet.
u Carefully fix the magnet/sensor unit to the machine.
Careless fixing can result in very high g-forces which may damage the sensor.
Bekijk gratis de handleiding van IFM VMB301, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | VMB301 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3793 MB |
