IFM DW3003 handleiding
Handleiding
Je bekijkt pagina 30 van 32
DW3003 Evaluation unit for monitoring and converting frequency signals
30
Menu Description
[Teach ASP3] [tASP3] Adopts the current process data value for ASP3 as the start point for
the analogue signal.
See Analogue output
[Teach AEP3] [tAEP3] Adopts the current process data value for AEP3 as the end point for
the analogue signal.
See Analogue output
[Back-to-box] [btb] Reset to factory settings.
The following is reset:
• All changed application-specific parameters and teaches.
• All writeable device identification parameters such as Application
Specific Tag, Function Tag or Location Tag.
• Diagnostic parameters, status parameters, events.
After the back-to-box reset, the device suspends communication until
the voltage is interrupted. It is still possible to switch the outputs. The
IO-Link data storage is not triggered.
[Reset application] [APPL] Reset of the parameter settings. The following is reset:
• All changed application-specific parameters and teaches.
If IO-Link data storage is activated, this triggers a parameter update in
the master.
[Locator Start] - The visual indicators of the device are switched to the localisation dis-
play pattern, making it easier to spot a device in an application.
[Locator Stop] - The localisation display pattern is stopped. The visual indicators of the
device show the device-specific operating states again.
[Reset Latch1]
[Reset Latch2]
[rES.L1]
[rES.L2]
Resets the latch LTC of the respective output.
Bekijk gratis de handleiding van IFM DW3003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | DW3003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2679 MB |
