IFM DW3003 handleiding
Handleiding
Je bekijkt pagina 28 van 32
DW3003 Evaluation unit for monitoring and converting frequency signals
28
SP2 SP1
(TP2) (TP1)
lowlow
high
PDV
0 0
1
H
H
Fig.30: [Window Mode] / [High active]
H: Hysteresis
SP1: Switch point 1
SP2: Switch point 2
TP1: Teach point 1 (= SP1)
TP2: Teach point 2 (= SP2)
SP2 SP1
(TP2) (TP1)
low
highhigh
PDV
0
1 1
H
H
Fig.31: [Window Mode] / [Low active]
H: Hysteresis
SP1: Switch point 1
SP2: Switch point 2
TP1: Teach point 1 (= SP1)
TP2: Teach point 2 (= SP2)
Switching the switching channels on and off can be delayed with the [dS] switching delay and [dr]
switch-off delay parameters.
PDV
t
SP
H
SSC
SSC delay
dS
dr
Fig.32: Example of a switching delay in single point mode with quantity detection
Menu Description
[SSC1.x. Config.Mode] [ModE] Sets the switch-point mode of the SSC channel.
[Deactivated] [OFF] No use of switch points (SSC always “inactive”).
[Single point] [1-P] Use of switch point SP1 for switching with hysteresis for resetting
(Ò Window Mode).
[Window] [WInd] Window function using SP1, SP2 and the hysteresis at both switch
points (Ò Window Mode).
[Two point] [2-P]
Use of switch point SP1 for switching and SP2 for resetting (Ò Two
Point Mode).
[SSC1.x Config.Logic] [LoGc] Sets the switch-point logic.
[High active] [no] When active, “high” is provided at the output.
[Low active] [nc] When active, “low” is provided at the output.
[SSC1.x Config.Hyst] [HyS] Sets the hysteresis for switch points SP1 and SP2.
[SSC1.x Param.SP1] [SP1] Threshold for the upper/ highest switch point.
[SSC1x Param.SP2] [SP2] Threshold for the lower/ smaller switch point.
[SSC1.x Delay.Switching delay] [dS] Delay of the SSC bit/ output when switching from inactive to active.
[SSC1.x Delay.Reset delay] [dr] Delay of the SSC bit/ output when switching from active to inactive.
x = [1, 2] = [Number of the switching channel]
Bekijk gratis de handleiding van IFM DW3003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | DW3003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2679 MB |
