IFM AL4203 handleiding
Handleiding
Je bekijkt pagina 52 van 82
AL4203 Remote I/O module 8DO 8DI
52
u Set the parameters.
w The device has been configured.
9.3.4 Configuring the input filters
u Observe the notes on input filters: Digital input filters (Ò/9)
The digital input filters of ports X05...X08 are configured via the [8DO / 8DI Module] and its
submodule:
• Submodule: 8DO/8DI + qualifier (Ò/60)
The module [8DO/8DI Module] is permanently assigned to slot 1.
The submodule [8DO/8DI + Qualifier] is permanently assigned to slot 1, subslot 1.
Each of the digital input filters can be configured separately.
Available parameters per input filter:
• debounce time
• hold time
• hold level
• signal inversion
Requirements:
ü Device is integrated in PROFINET project.
u Open the [Device view] of the device.
w The [Device overview] tab displays the device structure.
u Click on submodule [8DO/8DI + Qualifier] (slot [1 1]).
w The [Properties] view appears.
w The [General] tab displays the properties of the module.
w [Module parameters] provides access to the available parameters.
u Set the parameters of the digital input filters.
u Save the project.
w The filters of the digital inputs are configured.
w The changed configuration will be activated the next time the application is downloaded to the
device.
9.3.5 Configuring the digital outputs
u Observe the notes on digital outputs: Outputs (Ò/9)
The digital outputs of ports X01...X04 are configured via [8DO / 8DI Module] and its submodule:
Bekijk gratis de handleiding van IFM AL4203, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4203 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7189 MB |
