IFM AL4043 handleiding
Handleiding
Je bekijkt pagina 33 van 59
Remote I/O module 16 DI AL4043
33
Name Description Value range Access
[configuration] > [byteswap] Arrangement of the bytes in a data word • big-endian: Big-endian format
• little-endian: Little-endian
format
rw
1
1
Read and write
2
Read only
Requirements:
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select the [fieldbussetup] > [configuration] submenu.
u Select the [fieldbussetup] > [network] submenu.
w The menu page shows the current settings.
u Set the parameters.
u Click on to save the changes to the device.
u If necessary, restart the device.
w The ModbusTCP interface is configured.
9.2.3.2 Configuring input filters
u Observe the notes on input filters: Digital input filters (Ò/8)
Available parameters:
Name Description Value range Access
[debounce_time] Debounce time (= value * 0.1milliseconds) • 0: 0ms (default)
…
• 500: 50 ms
rw
1
[hold_time] Hold time (= value * 0.1milliseconds) • 0: 0ms (default)
…
• 60000: 6000 ms
rw
1
[hold_level] Hold level • low: hold LOW
• high: hold HIGH (default)
rw
1
[invert] Inversion • signal not inverted: do not invert
(default)
• signal inverted: invert
rw
1
1
Read and write; parameter can only be changed if no connection to fieldbus controller is established
Requirements:
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select submenu [io] > [port[n]] (n: 1...8).
w The menu page shows the current settings of the digital input filters on pin 2 and pin 4 of the
port.
u Set the parameters.
u Click on to save the changes to the device.
w The filters of the digital inputs are configured.
Bekijk gratis de handleiding van IFM AL4043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4043 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5049 MB |
