IFM AL1921 handleiding
Handleiding
Je bekijkt pagina 22 van 135
AL1921 IO-Link master with EtherNet/IP interface
22
Parameter Description Value range Access
Port Moneo, LR Agent or
SMARTOBSERVER
Number of the moneo port, LR AGENT
or LR SMARTOBSERVER to which the
process data is sent
• 0
…
• 35100 (default)
…
• 65535
rw
1
Interval Moneo, LR Agent or
SMARTOBSERVER
Cycle time for the transfer of the pro-
cess data to moneo, LRAGENT or
LRSMARTOBSERVER (value in ms)
• Off: No transmission (default)
• 500: 500 ms
…
• 2147483647: 2147483647 ms
rw
1
Application tag Source identifier of the IO-Link master
in the structure of the LR AGENT or LR
SMARTOBSERVER (String32)
e.g., “factory 2 plant 1” rw
1
1
Read and write
After changing the parameters [IP address Moneo, LR Agent or SMARTOBSERVER] or
[Application Tag], it may take up to 20 seconds until the device will establish a TCP connection
again.
To prevent the delay:
u Restart the device.
Requirements:
ü The parameter setting software has been started.
ü The connection to the device has been established.
u Select [IoT] menu.
w The menu page shows the current settings.
u Configuring the interface
u Save the changes on the device.
w Interface to the monitoring software has been set.
9.1.6 IoT: Configuring security mode
The unit provides a security mode. The security mode makes it possible to protect access to IO-Link
masters and connected IO-Link devices from the IT network. When security mode is activated, the
following restrictions apply:
• Access only by authentication (password protection)
• Access only via encrypted connection (TLS - Transport Layer Security)
The security mode only protects access and data transmission via the IoT interface.
The user name administrator cannot be changed.
The security mode can be enabled without setting the password at the same time. The next time the
unit is accessed, the configuration tool requires the password to be set.
After entering the correct password, the user has unrestricted access to the IO-Link master and the
connected IO-Link devices. The password is requested again when the current configuration tool
session has ended (e.g. after a restart).
Available parameters:
Parameter Description Value range Access
Security mode HTTPS Enabling / disabling security mode • Disabled: security mode deactivated
• Enabled: security mode activated
rw
1
Bekijk gratis de handleiding van IFM AL1921, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1921 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11184 MB |
