IFM AL1921 handleiding
Handleiding
Je bekijkt pagina 23 van 135
IO-Link master with EtherNet/IP interface AL1921
23
Parameter Description Value range Access
Security password Password for authentication
Note: The set password is not dis-
played.
wo
2
1
Read and write
2
write only
9.1.6.1 Activating security mode
To configure the security mode:
Requirements:
ü The parameter setting software has been started.
ü The connection to the device has been established.
ü The detailed view of the device is active.
ü Security mode is deactivated.
u Select the [IoT] menu.
w The menu page shows the current settings.
u Activating security mode
u Optional: Setting the password
u Save the changes on the device.
w Security mode is activated.
9.1.6.2 Disable the security mode
To configure the security mode:
Requirements:
ü The parameter setting software has been started.
ü The connection to the device has been established.
ü Security mode is activated.
u Go to the start screen of the device.
w Parameter setting software requires input of password.
u Enter the password and confirm.
w Parameter settings software has access to settings.
u Select the [IoT] menu.
w The menu page shows the current settings.
u Disable the security mode
u Write the changed values to the device.
w Security mode is deactivated.
9.1.7 Fieldbus: Configuring the EtherNet/IP interface
For communication with the EtherNet/IP network, the IP parameters of the EtherNet/IP interface must
be configured.
Available parameters:
Bekijk gratis de handleiding van IFM AL1921, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1921 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11184 MB |
