IFM AL1591 handleiding
Handleiding
Je bekijkt pagina 37 van 241
SolutionBlock IO-Link master AL1591
37
Name Description Value range Access
[Validation / Data Storage] Validation of the connected IO-Link
devices and automatic backup/re-
covery of the parameter sets of the
IO-Link device
• No check and clear:
– no validation
– No data storage and data recovery
• Type compatible V1.0 device:
– Validation (IO-Link V1.0)
– No data storage and data recovery
• Type compatible V1.1 device:
– Validation (IO-Link V1.1)
– No data storage and data recovery
• Type compatible V1.1 device with Backup
+ Restore:
– Validation (IO-Link V1.1)
– Data storage and data recovery
• Type compatible V1.1 device with
Restore:
– Validation (IO-Link V1.1)
– Data recovery
– No data storage
rw
1
2
[Vendor ID] Vendor ID of the IO-Link device to
be validated against
E.g. 310: ifm electronic gmbh rw
1
2
[Device ID] Device ID of the IO-Link device to
be validated against
E.g. 1129 TCC501 (ifm temperature sensor) rw
1
2
1
Read and write
2
Parameter only available if operating mode pin 4 (US) = IO-Link and IO-Link device is connected to the port
To configure the device validation and the backup / restore of parameter values:
Requirements:
ü ifm moneo|configure has been started.
ü The connection to the device is established (online).
ü Operating mode of pin 4 (US) of the port is IO-Link.
u Select the [Port x] > [IO-Link] menu (x = 1…8).
w The menu page shows the current settings.
u Set the parameters for device validation and backup / restore of parameter values.
u With active validation: Enter the manufacturer ID and device ID of the IO-Link device.
u Save the changes on the device.
w Device validation and backup / restore of parameter values have been configured.
9.1.5.4 Setting the cycle time
In the IO-Link operating mode, the cycle time of the port can also be set.
Available parameters:
Name Description Value range Access
[Cycle time actual] Current cycle time between the IO-Link
master and the IO-Link device (value in
µs)
• 1: 1 µs
…
• 132800: 132800µs
ro
1
[Cycle time preset] Cycle time between the IO-Link master
and the IO-Link device (value in µs)
NOTE!Observe the technical data of
the IO-Link device!
• 0: Fastest possible cycle time
• 1: 1 µs
…
• 132800: 132800µs
rw
2
Bekijk gratis de handleiding van IFM AL1591, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1591 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20312 MB |
