IFM AL1325 handleiding
Handleiding
Je bekijkt pagina 42 van 121
AL1325 IO-Link master with EtherNet/IP interface
42
Name Description Access
../dhcp Activate / deactivate DHCP mode rw
1
../ipaddress IP address of the IoT interface rw
1
../subnetmask Subnet mask of the network segment rw
1
../ipdefaultgateway IP address of the network gateway rw
1
1
Read and write
Applicable services:
Name Description
../setblock write all data points of the substructure blockwise
Write the data points of the substructure only with the setblock service!
9.2.6 IoT: Configuring security mode
The unit provides a security mode. The security mode makes it possible to protect access to IO-Link
masters and connected IO-Link devices from the IT network. When security mode is activated, the
following restrictions apply:
• Access only by authentication (password protection)
• Access only via encrypted connection (TLS - Transport Layer Security)
The security mode only protects access and data transmission via the IoT interface.
w The user name administrator cannot be changed.
w The set password cannot be read with getdata.
The current status of the security mode can be read with the getidentity service (Ò Service:
getidentity/79).
For the authentication, the user must additionally provide the POST requests with a valid user name
and password in the field "auth". The user name and the password are shown as Base64-coded
character strings.
The following requests can be done if the security mode is enabled, also without authentication:
• getidentity
• deviceinfo/vendor/getdata
• deviceinfo/productcode/getdata
Substructure: iotsetup
Available data points:
Name Description Access
../security/securitymode Enabling / disabling security mode rw
1
../security/password Password for authentication (Base64 coded) wo
1
Read and write
Valid character set for the Base64 coding / decoding of the password: UTF-8
Online tool for coding / decoding: www.base64encode.org
9.2.6.1 Example: Activating security mode
Task: The security mode of the IoT interface is to be activated. The valid password is to be set to
"password" (BASE64-coded: cGFzc3dvcmQ=).
Bekijk gratis de handleiding van IFM AL1325, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1325 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9966 MB |
