Icron USB 2.0 Ranger 2304GE-LAN handleiding

Niet gecategoriseerd

Icron

21 pagina's

PDF beschikbaar

Handleiding

Preparing Your Site

Before you can install the Ranger 2304GE-LAN, you need to prepare your site:

1. Place the computer where desired and set it up.

2. EnsuretolocatetheUSBdevice(s)within100mofCAT5e/6/7cablingoftheswitch.

3. Ensuretolocatethecomputerwithin100mofCAT5e/6/7cablingoftheswitch.

Thecabledistancebetweenswitchesmustbenogreaterthan100mifCAT5e/6/7isusedastheconnectionmedia.

Installing the LEX Unit

1. Place the LEX unit near the computer.

2. Connect the supplied USB cable between the host port on the LEX unit and a USB port on the host

computer.

3. ConnectaCAT5e/6/7patchcable(notprovided)intotheinformationoutletnearthehostcomputer.

4. Connect the patch cable into the Link port of the LEX unit.

Installing the REX Unit

1. ConnectaCAT5e/6/7patchcable(notprovided)intotheinformationoutletneartheUSBdevices.

2. Connect the patch cable into the Link port of the REX unit.

3. Place the REX unit near the USB device(s).

4. Assemble the power adapter and country speciﬁc power cord together and connect them into a

suitable AC outlet.

5. Connect the power adapter to the REX unit.

note

Bekijk gratis de handleiding van Icron USB 2.0 Ranger 2304GE-LAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.