Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 20 van 48
4
REPEATER AND DUPLEX OPERATION
4-3
D Checking the Repeater input signal
You can check whether or not another station’s
transmit signal can be received directly (not through a
repeater) by listening to the repeater input frequency�
z Hold down [MONI] to listen to the repeater input
frequency�
L While monitoring, the status indicator lights green, and
an S/RF meter dot blinks�
L While monitoring, the displayed frequency
automatically changes to the transceiver transmit
frequency (repeater input frequency)�
L When the other station’s signal can be directly
received, move to a non-repeater frequency, and use
simplex (Duplex OFF)�
Accessing a repeater
D Using the 1750 Hz tone burst
A 1750 Hz tone is required to access many European
repeaters�
Step 1. Selecting “t-CALL”
1� Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2� Repeatedly push [SET] to select “dtmF-t�”
3� Rotate [DIAL] to select “t-CALL�”
4� Push [V/M/C] to exit the Set mode�
Step 2. Using the 1750 Hz tone burst
1� Set the receive frequency
(repeater output frequency)�
2� Set the duplex direction of the transmit frequency
(p� 4-4)�
3� While holding down [PTT], push [MONI] to
transmit a 1750 Hz tone burst signal�
• The displayed frequency automatically changes to the
transmit frequency (repeater input frequency)�
L If “OFF” is displayed, check the frequency offset or
duplex direction status (p� 4-4)�
TIP: For only the EUR version:
Push [PTT] briey and release, and then hold
down [PTT] to transmit a 1750 Hz tone burst
signal�
4� Hold down [PTT] to transmit, release [PTT] to
receive�
L Hold down [MONI] to check whether the other
station’s transmit signal can be received or not, by
listening on the repeater input frequency�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
