Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 81 van 100
10-2
BASIC MANUAL
MAINTENANCE
10
10
D Partial reset
1. Open the RESET screen.
MENU
»
SET > Others > Reset
2. Touch “Partial Reset.”
3. Touch [YES].
L After resetting, the default VFO mode screen is
displayed.
D All reset
1. Open the RESET screen.
MENU
»
SET > Others > Reset
2. Touch “All Reset.”
3. Touch [NEXT].
4. After carefully reading the displayed message,
touch [YES] to perform the All reset.
L A dialog may dier, depending on the connection
status.
L After resetting, the default VFO mode screen is
displayed.
Resetting
D All reset for the RF deck
An All reset for the RF deck resets the items listed
below, that are saved onto the RF deck.
• REF Adjust
• DPD adjustment value
(only for user adjustment values)
• Internal antenna tuner preset points
• Pairing information
• RF deck’s static IP address settings (IP address,
Subnet mask, and Default gateway)
To perform an All reset for the RF deck, do the
following steps.
1
2
3
[I/O]
[RESET]
RF deck
(rear panel)
RF deck
(front panel)
[POWER] indicator
While holding down [RESET],
turn ON the RF deck.
Keep holding down [RESET]
for more than 10 seconds
after turning ON the RF deck.
After the [POWER] indicator
starts blinking violet, release
[RESET], and then push it
again.
Orange
Violet
10 seconds later
Blinks violet
(All Reset mode)
Orange
All reset has been
nished.
NOTE:
If you release [RESET] before the [POWER]
indicator starts blinking violet, the All reset is canceled
and the RF deck is turned ON in normal mode.
In that case, perform an All reset again.
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
