Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 63 van 100
8-6
BASIC MANUAL
SET MODE
8
8
MENU
»
SET > Function
[SPEECH/LOCK] Switch
Selects
SPEECH
action.
•
SPEECH
turns ON
SPEECH
turns the
Lock function ON or OFF.
•
SPEECH
turns the Lock
SPEECH
turns ON the Voice
Lock Function (Default: MAIN DIAL)
This function electronically locks
MAIN
DIAL
or the
panel display* to prevent accidental changes.
*
Keys and dials are also locked except for
AF RF/SQL
,
POWER
, and
SPEECH
.
Memo Pad Quantity (Default: 5)
MAIN DIAL Auto TS
Sets the Auto Tuning Step function for
MAIN
DIAL
.
When rapidly rotating
MAIN
DIAL
, the tuning step
automatically changes according to the rotation speed.
• OFF: Auto tuning step is turned OFF.
• Low: Approximately two times faster.
•
Approximately two times faster when the
MAIN DIAL Select (USB DIAL - SUB Only)
(Default: MAIN/SUB)
Selects whether
MAIN
DIAL
changes only the Main
band frequency, or changes both the Main and Sub
band frequencies, depending on which band is
selected.
L This is convenient when using the optional RC-28
to change the Sub band frequency.
MIC Up/Down Speed (Default: Fast)
Selects the steps per second when changing
an operating frequency by holding down the
microphone’s [UP]/[DN] key.
• Slow: Low speed (25 tuning steps/second)
•
Quick RIT/∂TX Clear (Default: OFF)
Selects the
CLEAR
operation for the RIT and ∂TX
functions.
•
CLEAR
for 1 second resets the
RIT or ∂TX shift frequency.
• ON: Pushing
CLEAR
resets the RIT or ∂TX shift
frequency.
[NOTCH] Switch (SSB) (Default: Auto/Manual)
[NOTCH] Switch (AM) (Default: Auto/Manual)
Selects the Notch function used in the SSB or AM mode.
• Auto: Only the Auto Notch function can be
used.
• Manual: Only the Manual Notch function can
be used.
• Auto/Manual: Both the Auto and Manual Notch
functions can be used.
FILTER Screen MAIN/SUB Select
(Default: Auto (by FILTER, PBT Operation))
Selects whether or not to automatically switch the IF
are switched between each other, while displaying the
FILTER screen.
SSB/CW Synchronous Tuning (Default: OFF)
Turns the Displayed Frequency Shift function ON or
OFF. This function automatically shifts the frequency
to match the CW pitch when the operating mode is
toggled between SSB and CW.
• OFF: Turns OFF the function.
• ON: When the operating mode is changed
between SSB and CW, the operating
CW Normal Side (Default: LSB)
Selects the carrier point in the CW normal mode.
• LSB: Sets the carrier point to the LSB side.
• USB: Sets the carrier point to the USB side.
MENU
»
SET > Function > Front Key Customize
[VOX/BK-IN] (Default: VOX/BK-IN)
[AUTOTUNE] (Default: AUTOTUNE)
The function assignments for the
VOX/BK-IN
and
AUTO
TUNE
keys on the front panel can be changed.
L See page 8-7 about the functions.
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
