Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 20 van 100
1-9
BASIC MANUAL
1
PANEL DESCRIPTION
Multi-function dial
When the Multi-function menu is closed, the
MULTI
control can be enabled to adjust functions.
The function is displayed in the upper right corner of
the screen.
Assignable key functions
* Touch the function indicator, or hold down
MULTI
for 1
second to assign the function to the
MULTI
control.
Indicator Action
kHz*
Changes the operating frequency in kHz
steps. (VFO mode only)
M-CH*
Selects Memory channels. (Memory mode
only)
RF PWR Adjusts the transmit output power.
MIC G Adjusts the microphone gain.
COMP Adjusts the Speech Compressor level.
D-SEL
Adjusts the center frequency of the
automatic preselector using the Digital
Selector function.
MONI
Adjusts the audio level for the Monitor
function.
SPEED Adjusts the Keying speed.
PITCH Adjusts the CW pitch.
S TONE Adjusts the CW side tone output level.
NB LEV Adjusts the Noise Blanker level.
NB DEP
Adjusts the DEPTH (Noise attenuation
level).
NB WID
Adjusts the WIDTH (Blanking duration
time).
NR LEV Adjusts the Noise Reduction level.
APF Adjusts the peak frequency of the APF.
APF LV Adjusts the audio level of the APF.
NOTCH Adjusts the Notch lter frequency.
VOX G Adjusts the VOX gain.
A-VOX Adjusts the ANTI VOX level
VOX D Adjusts the VOX delay time.
BKIN D Adjusts the Break-in delay time.
DRIV G
Adjusts the transmitter level at the driver
stage.
ATT
Adjusts the attenuator level of up to 45 dB
(in 3 dB steps).
Function indicator for
MULTI
z To assign the function to the
MULTI
control, touch
the item for 1 second on the Multi-function menus.
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
