I-Tec CA5MONITORDOCKPD handleiding
Handleiding
Je bekijkt pagina 9 van 82
CA5MONITORDOCKPD
9
ENGLISH
SAFETY INSTRUCTIONS FOR USING THE DOCKING STATION
- General safety instructions
1 Follow these safety guidelines to prevent possible damage to your computer and ensure
your own safety. Unless otherwise noted, all procedures in this document assume that
you have read the safety information that came with your computer. Place the device
on a hard, level surface. Leave approximately 10 cm of clearance on all vented sides to
allow air to ow for proper ventilation. Restricting airow may damage the equipment
or cause a re.
2. Do not stack equipment on top of each other or place them so close together that they
are exposed to recirculation or preheated air.
3. Make sure that nothing is resting on the equipment cables and that the cables are
positioned so that they cannot be tripped over or stepped on.
4. Ensure that all cables are connected to the appropriate connectors. Some connectors
look similar and can be easily confused (for example, do not plug the telephone cable
into the power connector).
5 Do not place the device in an enclosed wall unit or on a soft fabric surface such as a
bed, sofa, or carpet.
6. Keep the equipment away from heat sources.
7. Keep the equipment away from abnormally high or low temperatures so that it can
operate within its operating range.
8. Do not insert objects into the vents or openings of the equipment. Failure to do so may
result in re or electric shock due to short circuit of internal components.
9. Do not use the unit in a humid environment, such as near a hot tub, near a sink, near a
swimming pool, or in a damp basement.
10. Do not use mains-powered equipment during a storm. Battery-powered devices may
be used if all cables are disconnected.
11 Avoid contact of liquids and food with the equipment.
12. Unplug the device from the electrical outlet before cleaning it. Clean the device with
a soft cloth dampened with water. Do not use liquid or aerosol products that may
contain ammable substances.
13. To avoid potential electrical shock hazards, do not connect or disconnect any cables
or perform maintenance or recongure the equipment during a storm.
14. Before touching docking station components, ground yourself with a grounding
bracelet or periodically touch an unpainted metal surface, such as the metal part on
the back of the computer. While working, touch the unpainted metal surface regularly
to remove any static electricity that could damage internal components.
15. When unplugging the cable, pull on the connector or grip, not the cable itself. Some
cables have connectors with latches or screws that must be loosened before discon-
necting the cable. When disconnecting cables, hold them straight to avoid bending
the pins. When connecting cables, make sure that the ports and connectors are prop-
erly rotated and aligned.
Bekijk gratis de handleiding van I-Tec CA5MONITORDOCKPD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | I-Tec |
| Model | CA5MONITORDOCKPD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8118 MB |
