I-Tec CA5MONITORDOCKPD handleiding
Handleiding
Je bekijkt pagina 10 van 82
Quick Start
10
ENGLISH
GENERAL SAFETY INSTRUCTIONS REGARDING POWER SUPPLY
- Before connecting the equipment to an electrical outlet, check the rated voltage and
make sure that the required voltage and frequency match the available power source.
- Make sure the computer, monitor, and connected devices have the proper rated electrical
power to operate with the power adapter connected in your area.
- If the power cord is damaged, do not plug it into an electrical outlet.
- To avoid electric shock, plug the power cords of the equipment into properly grounded
electrical outlets. If the equipment is equipped with a three-prong power cord, do not
use adapter plugs that bypass the grounding function or remove the grounding element
from the plug or adapter.
- If using an extension power cord, make sure that the total rated power of the products
connected to it does not exceed the rated current of the extension cord.
- If you must use an extension cord or splitter, make sure that the extension cord or splitter
is connected to a wall outlet and not to another extension cord or splitter. The extension
cord or splitter must be designed for grounded plugs and plugged into a grounded outlet.
- If you are using a splitter with multiple outlets, be careful when plugging the power cord
into the splitter. Some splitters may allow the plug to be connected incorrectly. Incorrect
connection of the power plug can cause permanent damage to the equipment and may
also cause a risk of electric shock or re. Make sure that the grounding tip of the power
plug is inserted into the grounding contact of the splitter.
- When unplugging the equipment from the power outlet, pull the plug, not the cord.
- Use only a power adapter supplied by i-tec technologies s.r.o. approved for use with this
equipment. Use of any other power adapter may cause re or explosion.
- If you use the power adapter to power a computer or charge a battery, place it in a
ventilated area, such as on top of a desk or on the oor. Do not cover the power adapter
with paper or other objects that may reduce cooling. Do not use the power adapter in
its carrying case.
- The power adapter may become hot during normal operation of the docking station
or computer.
- Use caution when handling the adapter during or immediately after operation.
- We recommend placing the adapter on the oor or table so that the indicator light is vis-
ible. This way you will know immediately when the adapter shuts down due to external
inuences. If for some reason the green light goes out, unplug the power cord from the
outlet for 10 seconds and then plug it back in.
- Never use a power adapter that shows signs of damage or excessive wear
FREQUENTLY ASKED QUESTIONS
Available on our website www-i-tec.pro under “FAQ” for this product
Bekijk gratis de handleiding van I-Tec CA5MONITORDOCKPD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | I-Tec |
| Model | CA5MONITORDOCKPD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8118 MB |
